Easier to use products through auto-settings and better visibility.
Improve productivity with technologies that enhance efficiency and save you money.
Optimize your operation through advanced welding processes, training and weld data monitoring.
CC/CV, Aux Power
MPa, Aux Power
MIGRunner Pkg, CC/CV with S-74D Feeder
MIGRunner Pkg, CC/CV with 20 Series Feeder
Click image to zoom.
Double click image to zoom.
Click here to open in a new window.
Portable feeder, with standard remote voltage control, for applications where the feeder is within 100 feet of the power source and control cords are acceptable.
Simple and cost-effective four drive roll wire feeder for industrial manufacturing and fabricating.
Designed for heavy industrial applications, our popular bench feeders are available in multiple models to fit your needs.
Extension cables are used to extend the distance between the power sources and feeder or remote control. Not compatible with Axcess or Continuum systems.
Coolmate™ water coolers designed for water-cooled torches
Includes flowmeter regulator with 10-foot
(3 m) gas hose, 10-foot (3 m) 4/0 feeder
weld cable with Dinse connector on one
end and a lug on the other, 15-foot (4.6 m)
work cable with Dinse connector on one
end and 600-amp C-clamp on the other.
The choice of professionals for exceptional aluminum welding results in industrial or commercial applications.
A WC-24 is required to operate Spoolmatic and
Spoolmatic Pro guns with 14 Pin Miller CV power sources and engine drives. Not required with Millermatic machines - check your literature for typical installations.
The easy-to-install module brings Insight Core™ capabilities to your existing fleet. This simplified, Internet-based weld data solution collects, transmits, and presents actionable information to any Web-connected device. Insight Core can help you increase productivity, improve weld quality, and manage costs.
Small footprint, easily maneuverable, with cylinder rack low enough that you do not have to lift bottles. Durable , HD ergonomic handles are designed for comfort.
300 ft. (91.4 m.)operating range
26.5 ft. (8 m.) cord, Momentary- and maintained-contact control
26.5 ft. (8 m.) cord, Hook and loop fastening,
For CC, CV or CC/CV welding power sources - Provides easy way to change welding process. Also includes features of Polarity Control.
Accommodates any combination of four XMT 350 power sources that will fit into an empty XMT Rack. Order fuse kit separately for appropriate power supply and intended primary voltage.
Accommodates any combination of four XMT 450
power sources, or six XMT 304 or XMT
350 power sources will fit into an empty
XMT Rack. Order fuse kit separately for
appropriate power supply and intended
For HDC and WC-115 weld controls, XR-Controls prior to serial number KK309906, and 50 Series feeders. Fully-loaded 14-pin extension cables for remote controls, and 24-volt and 115-volt feeders.
For XR-Controls, SuitCase 12RC, 20 Series feeders, and 70 Series (S/D/DX) feeders. For 14–pin remote controls/24 VAC feeders. 14-pin plug to a 14-pin socket. (Not for 115-volt XR or 50 Series feeders.)
Standard, simple feeder for most heavy-industrial applications.
Standard, simple feeder for most heavy-industrial applications providing increased accuracy and control of the most common weld parameters.
Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 450 MPa offers built-in pulse programs for standard steels, high-strength steels and aluminum.
Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 450 CC/CV is the most popular model for its flexibility and simplicity.
Portability and excellent arc performance make the XMT family the most popular in the industry. ArcReach provides remote control of the power source without a cord – saving time and money.
To activate your FREE subscription today, simply select which newsletter(s) you would like to receive and complete the form below.
Already signed up? Manage your subscription(s) by signing into your account. Or if you don't have a Miller account, create one today. Sign in / Create Account.
*Please select at least one e-Newsletter.
You can manage your subscription(s) by signing into your account. Or if you don't have a Miller account, create one today. Sign in / Create Account.