Pipe Welding | MillerWelds

When Preheating Before Welding, How to Choose the Right Equipment

Welding preheat equipment such as air-cooled cables and a new heating tool for induction, deliver flexibility and efficiency.

PipeWorx 400 Welding System Improves Manufacturer’s Productivity 50 Percent

A switch to Regulated Metal Deposition (RMD®) helped Sigma Thermal increase productivity while maintaining high weld quality.

Miller Preheating Technology for Roll-Welded Pipe Increases Quality, Productivity and Safety

Gaining consistency in preheating rolled pipe, or flat plate or seam welds, without the hassle and hazards of open flames, increases safety and efficiency.

ArcReach® Technology: Don’t Walk. Weld.

Don’t walk to the power source to adjust weld parameters. Do it at the weld joint with ArcReach technology.

CST™ 282 Stick/TIG Welder: Portable, Simple, Flexible

Weld stick/TIG in the field or shop with the CST 282. Portable, flexible and easy to use, it delivers precise, high-quality welds.

Wireless Interface Control: Get Total Control Where You Work

Wireless Interface Control puts total control of your Trailblazer 325 or Big Blue engine-driven welder in the palm of your hand.

Save Time: XMT® 350 FieldPro™ System With Polarity Reversing

Walking to switch weld processes wastes productivity. Get it back with the XMT 350 FieldPro system with Polarity Reversing!

Miller® Remote Solutions: Redefine Where You Work

Redefine where you work with new Miller® remote solutions for Bobcat, Trailblazer and Big Blue engine-driven welders!

Easily Change Welding Processes for Pipe Fabrication

The PipeWorx 400 lets welders at Dixie Mechanical switch welding processes with the push of a button during pipe fabrication.

Advancements in Hobart Self-Shielded Wires Benefit Transmission Pipeline Applications

Maximize Productivity with Simple, Cost Effective Options of Miller ProHeat 35 Induction System

Miller’s ProHeat™ 35 Induction System offers flexibility to meet a wide range of heating requirements in welding applications.

Miller PipeWorx Paired with Pipe Jammer Results in Nearly 100% X-Ray Passage Rate

Combining Miller PipeWorx power source and a RMD root pass with a Pipe Jammer system led to major productivity gains for USA Energy Fabrication.

Selecting Best Pipe Welder Was Key for Dixie Mechanical

Dixie President Greg Howell knows easy-to-use welding power sources help operators produce quality welds efficiently.

Easily Achieve Targeted Preheat Temperatures on Moving Parts using Induction Heating from Miller

The Miller ProHeat™ rolling inductor heating system is a simple and cost-effective heating process.

Pipeline Welding Requires a Durable Machine

Pipeliners Local 798 Union welder Tyler Sasse knows he can rely on the Miller Big Blue 400 PipePro® for his demanding job.

How to Reinstall a Trimmed Liner in Your MDX™ MIG Gun

Learn how to reinstall a trimmed liner in your MDX-100 or MDX-250 MIG gun.

New Bobcat™ and Trailblazer® Engine-Driven Welders

Get everything that you expect and more from Miller® engine-driven welders with the next-generation Bobcat™ and Trailblazer®. We’ve redesigned our engine-driven welders to be smaller and lighter. These machines are now up to 100 pounds lighter and 13% smaller than ever before. And, they’re even more rugged and reliable, producing better weld quality. All working to boost your productivity...

Why Pipe Fabrication Industry Leaders Choose PipeWorx 400

From root to cap, the Miller® PipeWorx 400 system delivers increased productivity and quality for every pipe welded.

Maxstar® 210 Product Overview

The Maxstar® 210 STR model provides basic functionality, the base model features HF and basic pulse, and the DX model offers ultimate adjustability.

Eliminate Back Purge in Stainless Steel Pipe Welding

Dixie Mechanical eliminated back purge and cut welding time by more than 30% with a process change and the PipeWorx 400.

RMD Welding Technology Doubles Productivity for Sigma Thermal

Manufacturer Sigma Thermal improved productivity 50 percent with a switch to Regulated Metal Deposition (RMD®) from Miller.

Welding Process Change Makes Manufacturer More Competitive

A welding process conversion to Regulated Metal Deposition (RMD®) helps Sigma Thermal stay ahead of the competition.

Dixie Mechanical Saves Time and Money With Miller PipeWorx

Pipe fabricator Dixie Mechanical uses the latest in welding technology to eliminate back purge on stainless steel pipe.

Cap and Fill Passes on Pipe with Pro-Pulse

Provides a technical explanation of the techniques required to weld carbon steel and stainless steel pipe with the MIG Pro Pulse.

ZoneFlow Fume Extraction Technology: Wide Fume Capture Zone

Get a weld fume capture zone that’s up to three times larger than traditional fume extraction systems.

CST™ 282 Stick/TIG Welder: Accessing Fault Codes

See how to access fault codes from your CST 282 to help with troubleshooting or when service is required.

Welding Process Changeover with Miller's PipeWorx

With multiprocess welding systems, process changeover takes five to 10 minutes. Operators usually need to change the welding lead (TIG torch to Stick electrode holder to wire feeder, etc.) as well as swap the work lead because different processes require different polarities. In pipe fabrication shops, MIG, Stick

Multiprocess Inverter Offers Improved Productivity and Weld Quality

Welding operators with National Welding Corp. dealt with challenges on a Seattle tunnel construction jobsite, including restricted space and tight deadlines.

How to Reinstall a Trimmed Liner for MDX™ MIG Guns with Set Screw Power Pin Cap

When the power pin cap is removed from a MDX™ MIG gun, the liner can retract and appear too short to lock into place. Learn how to reinstall the liner.

Using Your Miller Powered Air Purifying Respirator (PAPR)

Learn how to properly use and maintain your PAPR system stay compliant and keep it in good condition.

Using Your Miller Supplied Air Respirator (SAR)

Learn how to properly use and maintain your SAR system to stay compliant keep it in good condition.

RMD on Carbon Steel Pipe

See a technical explanation of the techniques required to weld carbon steel pipe with the RMD Pro (MIG Modified Short Circuit) welding process.

Shinn Mechanical's Award-Winning Welding Boom Configuration

Shinn Mechanical's innovative welding boom design.

Pulsed MIG Welding Improves Weld Quality in Pipe Fabrication

The advanced MIG welding outputs of Miller's PipeWorx™ Welding System — RMD™ and Pro-Pulse™ — enable you to make code-quality root.

RMD on Stainless Steel Pipe

Provides a technical explanation of the requirements to weld stainless steel (without backing gas) pipe with the RMD Pro.

Preparation of the Pipe Joint

Provides a technical explanation of the steps required to prepare and tack weld pipe for RMD Pro (MIG Modified Short Circuit) welding.

USA Energy Fabrication More than Triples Productivity with Miller PipeWorx

Combining Miller PipeWorx and RMD root pass with a Pipe Jammer system led to major productivity gains for USA Energy Fabrication.

ProHeat™ Rolling Inductor Provides Safer Alternative to Preheating Rolled Pipe

Preheating is critical to achieve high weld quality; it eliminates moisture and reduces the opportunity for hydrogen cracking.

* First Name
* Last Name
* Email Address
* Confirm Email
* Country
* Postal Code
	Sign Up
	This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
All fields are required. At least one newsletter must be selected. The entered e-mail addresses do not match. An unknown error occurred. Please try again later.

Ease of Use

Productivity

Optimization and Performance

Infrastructure and Pipe

On the pipeline, every weld is critical.

Resources

Pipe and Tank Product Guide

Reduce Costs with ArcReach

Resource Center

Filter Items:

Equipment Selection and Maintenance