Plasma Cutting for Beginners: Piercing With Plasma
If you’re new to piercing metal with a plasma cutter, don’t miss these quick plasma cutting tips for achieving the perfect...
Plasma Cutting for Beginners: Using the Right Shield
When plasma cutting, you’ll need both a drag shield and a deflector shield. Learn when to use each.
Plasma Cutting for Beginners: Amperage and Travel Speed
When it comes to plasma cutter setup and technique, setting the correct amperage and using the right travel speed are key.
Dirty Power? Discover Auto-Line Power Management Technology
Maintaining arc consistency with dirty input power can be difficult. Auto-Line™ power management technology alleviates...
Why Rick Dale Uses the Multi-Voltage Plug in His Shop
Rick Dale and his team need to be able to move the welder to the work, which is why they use Miller® machines equipped...
Miller Partners with Women of AFT Customs
Jim Giuffra, metric motorcycle builder and founder of AFT Customs employs women to assist in building up to 70% of the...
Spectrum X-TREME™ Plasma Cutters
Stacey explains that if you cut metal in your shop, at the track, on the farm, or at your buddy's garage, then plasma...
Cotati Speed Shop - Episode 8: Cotati Speed Shop, Miller Making Headway on Service Truck
In the January DIY e-newsletter, Miller announced a special partnership with Zane Cullen, owner of Cotati Speed Shop.
Cotati Speed Shop - Episode 11: Spectrum 375 X-TREME™ Used to Cut Rusty Steel
Miller product manager uses the Spectrum 375 X-TREME™ when making alterations to the back end of the '69 GMC Fleetside...
Cotati Speed Shop: Episode 3.2 - Plasma Cutting Tips & Tricks by Miller
The cylinder rack will be housed in the '69 GMC Fleetside pick-up truck that Miller's working on for the upcoming 2011 Hot...
Cotati Speed Shop: Episode 2 - Miller and Cotati Team Outfit the Service Truck
Builder Zane Cullen, owner of Santa Rosa, California-based Cotati Speed Shop recently invited Miller product managers to...
Episode 7: Suspension Covers/Fill Plates with Hollywood Hot Rods Fabricator Dave Gross
Hollywood Hot Rods fabricator creates suspension covers/fill plates for the Street Rodder Road Tour vehicle using the...
STRETCH on the Spectrum 375 X-TREME
STRETCH has welded a name for himself in Kansas City, Mo. using Miller's Spectrum 375 X-TREME to cut metals for his...
Plasma Cutting: Setup and Cutting Prototype Marrs Cycle Filler Plates Using Spectrum 375 X-TREME
Brad Fanshaw of Marrs Cycles uses the Spectrum 375 X-TREME™ plasma cutter to create prototype filler plates.
Metal Artist Puts the New Miller Spectrum X-TREME™ Plasma Cutter to the Test
Metal artist Stephen Christena of Midwest Metalworks takes on a challenging project cutting a fine-detail design in...
Miller Plasma Cutter Feature - Auto-Line
An Auto-Line™ unit automatically connects to any primary input voltage from 208 -- 575 volts single- or three-phase, 50 or...
Miller Spectrum 375 Plasma Cutter Cutting Demo
See the Spectrum 375 plasma cutter slicing through mild steel.
Plasma Cutting for Beginners: Clean vs. Sever Cut
lasma cutters are rated at a clean-cut measurement. But what does that mean? Andy Weyenberg with Miller explains.
Miller Plasma Cutters Size Does Matter - Part 2
Watch how the portability of Miller Plasma cutters really does matter when it you need it most.
Miller Spectrum 375 X-TREME Portability and Performance
Miller's Spectrum 375 X-TREME plasma cutter has the portability you need at only 18lbs and a convienent X-CASE carrying case.
Miller Spectrum 375 X-TREME Plasma Cutter - Removing Brackets Demo
See the Spectrum 375 X-TREME plasma cutter in action removing brackets on a vehicle frame.
Miller Spectrum 375 X-TREME Plasma Cutter: Body Mods, Demolition
See the Spectrum 375 X-TREME in action, performing automotive body modifications.
NEW Spectrum X-TREME™ Plasma Cutters — Power. Precision. Portability.
The Spectrum X-TREME™ Plasma cutters are packed with new technology that delivers even more power in the same highly...
Spectrum X-TREME™ Plasma Cutters Offer Auto-Refire Technology for Expanded Metal Applications
Auto-Refire technology, available on Spectrum X-TREME™ Plasma cutters, controls the pilot arc when cutting expanded metal.
Consumable Advantage: Miller XT Plasma Torch Reduces Cost, Increases Life of Consumables
The Miller XT Plasma torches are designed to reduce total cost of ownership by making consumables last longer.
Miller Spectrum X-TREME™ Plasma Cutters feature Auto-Line™ & Multi-Voltage Capabilities
No matter what power is available — 115 or 230 volts — you can plug right in and get to work using a Miller Spectrum...
NEW Spectrum 375 X-TREME™ with XT30 Torch Delivers Big Cutting Power
Generating 30 amps, the Miller Spectrum 375 X-TREME delivers big cutting power, enough to slice through 3/8-in mild steel.
The NEW Miller XT Plasma Torch - Difference You Can Feel
The all-new Miller XT Plasma torch has been redesigned for maximum comfort and control you'll feel from first use.
Experience X-TREME portability with Miller Spectrum X-TREME Plasma cutters
Miller Spectrum Plasma cutters deliver big cutting power in packages small enough to carry over your shoulder with our...
Spectrum X-TREME Plasma Cutters Offer Versatility: Multi-Voltage Technology and Easy to Read Panel
In addition to power, precision and portability, the Miller Spectrum X-TREME Plasma cutters offer versatility as well.