For work truck fleet managers who need to eliminate truck engine idle time, CabEn climate solutions are the only fully integrated cab heating and cooling systems that provide all-day relief from the outside environment while the truck engine is turned off.

The ready to work accessory kit for EnPak power systems, which includes an auxiliary power panel, battery charge/crank assist cables and 50 ft. weld cables. This panel saves time and reduces the risk of injury by eliminating the need to climb into the truck bed.

MIG aluminum accessory kit for EnPak power systems, which includes a Spoolmatic 30A, 25 ft. extension hose and regulator assembly.

Cools and removes moisture from the air supply. Designed for use above 32 degrees Fahrenheit (0° C). Bypass in colder temperatures.

A regenerating inline air dryer system that eliminates moisture in the air stream to prevent air tool freeze-ups in cold climates

Ability to wire for 120 or 240 VAC loads. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).

NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120-240-volt plug to common Millermatic® and Spectrum® 240-plus. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).

For the EnPak® A28, EnPak® A30, EnPak® A60, Bobcat®, Trailblazer® featuring Battery Charge / Crank Assist 2-Pole Connection

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!

The choice of professionals for exceptional aluminum welding results in industrial or commercial applications.

Most economical and reliable spool gun in its class! Designed specifically for home hobbyists & light fabricators. Rated at 160 amps at 60% duty cycle - ideal for welding with .023 - .035 wires.

Extends Spoolmatic away from the control box. Convenient plug-in connections. Includes gas hose, control cord, and weld power cable with International-style insulated connector. For Spoolmatic only.

Single-stage flow gauge regulators are compact and feature a forged brass body with 2-inch diameter gauges and a self-reseating pressure relief valve. They also include a Sure Seat™ protective inlet filter and a durable neoprene-composite diaphragm.

Protective cover for EnPak™ A30 Diesel.

Air Compressor Service Kit includes oil filter, air filter, oil separator and compressor oil.

For use with EnPak A28, EnPak A30, Bobcat and Trailblazer Air Pak products in cold weather applications.

Cold weather, diesel fuel heater kit for EnPak A30 Diesel and Bobcat 200 Air Pak Diesel.

Cuts up to 3/8 in. mild steel. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.