Spectrum® 375 X-TREME™ with XT30 Torch | MillerWelds

Spectrum® 375 X-TREME™ with XT30 Torch

907529
Cuts up to 3/8 in. mild steel. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.
Spec Sheet (English) Spec Sheet (Spanish)
Which product is right for you? Find out here.

Features

What's Included

  • Spectrum 375 X-TREME
  • XT30 hand-held torch with 12-ft. (3.7 m) cable
  • Heavy-duty work clamp with 12-ft. (3.7 m) flexible cable
  • 10-ft. (3 m) MVP™ power cord
  • MVP plugs 5-15P (120 V, 15 A), 6-50P (240 V, 50 A)
  • X-CASE provides protection in transport and strorage
  • Shoulder Strap
  • Consumables box with 2 electrodes, 2 tips, deflector, and air fitting
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.        
XT30 Torch & Quick Connect Work Lead and Clamp
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy. Comes with the ultra flexible Quick Connect work lead with smaller heavy duty clamp.
Auto-Refire™
Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.
Auto-Line™ and MVP™ (multi-voltage plug) Adapters
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord.
Portability
Portable in the shop or at the job site—at 19 lb the shoulder strap allows the end user to easily move from location to location.
Protective X-CASE™
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plugs, consumable box, as well as gloves, eye protection, etc.
Wind Tunnel Technology™ and Fan-On-Demand™
Wind Tunnel Technology - internal air flow that protects electrical components and PC boards from dirt, dust, debris…greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.   Learn More
Generator Compatible
The Spectrum 375 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generators. Limited output will occur when used with smaller generators.

Not Included

  • Small Running Gear/Cart
  • Air source (compressor or bottled gas)
  • Personal safety products (safety glasses, gloves)

Specifications

Processes

Plasma (PAC)

General Specifications

Title Spectrum® 375 X-TREME™ with XT30 Torch
Industries Interests Construction and Fabrication
Input Hz 50/60 Hz
Portability Strap
Capability Gouging —
Rated Output at 104 Degrees Fahrenheit 120 V (15 A): 20 A at 88 VDC, 60% duty cycle; 120 V: 27 A at 92 VDC, 35% duty cycle; 240 V: 30 A at 92 VDC, 40% duty cycle
Recommended Generator Power 4000
Cutting Amperage Min 14 A
Cutting Amperage Max 30 A
Metal Type Mild Steel
Stainless Steel
Aluminum
Stainless Steel Travel Speed - IPM 15 IPM
Aluminum Travel Speed - IPM 15 IPM
Mild Steel Travel Speed - IPM 15 IPM
Net Width 5.5 in
Net Height 9 in
Net Length 13.25 in
Net Weight 19 lbs
Warranty 3 Years
Miller's True Blue Warranty

Accessories

X-Case Carrying Case

For use with Maxstar® 150 S/STL/STH, Spectrum® 375/625 X-TREME™
Bobcat™ / Trailblazer® / Big Blue® Full KVA Adaptor Cord

NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120-240-volt plug to common Millermatic® and Spectrum® 240-plus. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).
Torches XT30/C

Plasma Standoff Roller Guide

Consumables

Plasma Torch Consumable Kit

For use with XT30C plasma torches
Replacement Air Filter for In-Line Filter Kit

Tip, 30 Amp (3 per pkg)

For use with XT30 and XT40 series plasma torches

Resources

Articles

Using a plasma cutter on a piece of metal
8 Tips for Using a Plasma Cutter in Custom Car Builds
Ensure proper plasma cutter settings with a sample cut and use faster travel speeds for cleaner cuts. Read more plasma...
TIG Welding an aluminum nose
Welding How To: Building a Stainless Steel Car Grille
Metalworker Ron Covell demonstrates how to build a stainless steel car grille using a TIG welder and plasma cutter.
closeup of plasma cutter cutting meta
How to Optimize Plasma Cutter Performance
Learn the best practices that will improve your plasma cutting skills, regardless of material or thickness.

Videos

Assembled in Appleton Miller Plasma Cutters
Plasma Cutting for Beginners: Piercing With Plasma
If you’re new to piercing metal with a plasma cutter, don’t miss these quick plasma cutting tips for achieving the perfect...
Plasma Cutting for Beginners: Using the Right Shield
When plasma cutting, you’ll need both a drag shield and a deflector shield. Learn when to use each.

Related Items

Indura® Cloth Jacket, XL

Designed for Fit and Comfort with the Lifetime Flame-Resistance of Indura®

MP-10™, Black

Passive, Non-Auto-Darkening Helmets

TIG/Multi-Task Gloves, L (6 per pkg)

Designed for TIG welding and multi-purpose applications
Protective Eyewear, Black Frame, #5

Optimal eye coverage with increased comfort and style.

Reviews & Ratings

Question & Answers