Spectrum® 875 Plasma Cutter with XT60 Torch - MillerWelds

Spectrum 875 Plasma Cutter with XT60 Torch with 20-ft. Cable

Cuts up to 7/8 in. mild steel. Available in hand torch configurations as well as CNC/Automation long and short body machine torch models.


What's Included

  • Spectrum 875
  • XT60 hand-held torch with 20-ft. (6 m) cable. Includes a complete set of 60 A consumables.
  • Heavy-duty work clamp and flexible cable with quick connect
  • 10-ft. (3 m) power cord
  • Extra consumables
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.  Learn More
Automatic Air Regulation
For end user convenience, the unit has no pressure gauge or manual regulator knob. The unit automatically adjusts the air pressure to the torch for optimum cutting and gouging. No adjustments necessary.
Ultra-Quick Connect™ Torch
The fastest plasma torch and work cable connection and removal in the industry.  Learn More
CNC/Automation Cutting Capable
Factory ready CNC/Automation models are available in long or short body torches as well as retrofit kits to convert hand held machines to be capable of CNC/Automation cutting.
Wind Tunnel Technology™ and Fan-On-Demand™
Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components. Fan-On-Demand cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit  Learn More
Can Be Powered by Miller Engine Drive/Generator
Generator power at or above 10 kW (e.g. Bobcat™) or equivalent competitive equipment required.  Learn More
Ultra-Quick Connect™ Work Cable & Clamp
Work cable and clamp make for fast and easy setup and storage. The new ultra flexible Quick Connect work lead comes with a smaller heavy duty clamp.
Auto-Refire™ Technology
Provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.

Not Included

  • Air source (compressor or bottled gas)
  • Personal safety products (safety glasses, gloves)


Product Literature

PC/9.8 Spectrum 875-875 AutoLine - Spanish



Plasma (PAC)

General Specifications

Title Spectrum 875 Plasma Cutter with XT60 Torch with 20-ft. Cable
Industries Interests Racing / Customizing / Restoring
DIY / Home Hobbyist
Heavy Equipment Manufacturing
Boat / Yacht
High Purity Processing
Capability Gouging
Plasma Material Thickness Mild Steel 7/8 in. (22.2 mm) 15 IPM
Stainless Steel 7/8 in. (22.2 mm) 15 IPM
Aluminum 5/8 in. (15.9 mm) 15 IPM
Rated Output at 104 Degrees Fahrenheit 208 V: 60 A at 140 VDC, 40% duty cycle; 230 VDC: 60 A at 140 VDC, 50% duty cycle
Recommended Generator Power 11000
Input Voltage 208 V
220/230/240 V
Input Phase 1-Phase
Input Hz 50 / 60 Hz
Net Width 8.75 in
Net Height 13.5 in
Net Length 18.75 in
Net Weight 49 lbs
Warranty Miller's True Blue Warranty

Reviews & Ratings

Rated 5 out of 5 by from Great Plasma Cutter But Needs A Cover Great Plasma Cutter! Would highly recommend but disappointed in Miller for providing a box or cover for other models but requiring you to buy it for the 875. I would think they could throw in some sort of soft cover when you spend $2000+ on a plasma cutter. I have the 50' torch and haven't had any issues. It cuts great and is super strong. Satisfied with my purchase.
Date published: 2013-04-30
Rated 5 out of 5 by from Time Saver This has already saved a lot of fabrication time in the short duration that I've had it. Easy to use with clean, smooth cuts.
Date published: 2013-04-30
Rated 1 out of 5 by from Torch cable & head The torch head is very stiff and is molded in the side position to where you cannot hold it very steady down on the metal when trying to cut a piece with a circular or straight line template. When you are free handing a cut you want a limber cable and torch head. Don't get me wrong the power source is well recommended but the torch assembly has to go.My rating is low due to this part of the package. If it wasn't for this i would have kept the machine.Blue is the color of all our machines except our plasma machine. I hope Miller redesigns the torch assembly.
Date published: 2013-04-30
Rated 5 out of 5 by from Excellent product. I bought this to cut I-beams off of semi trailers that get refurbished.what was taking me 6 hrs with a cutting torch is taking me 30min with the 875c plasma cutter.im cutting 3/4 in plate and 1/2in I-beam with ease.
Date published: 2013-04-30
  • y_2017, m_12, d_9, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_907583, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_millerelectric