Air-cooled Quick Wrap | MillerWelds

Air-cooled Quick Wrap

301452
Works on pipe with outside diameter of 10-1.5 inches and up to a 600° F (315°C). Most joints will require two quick wraps to be used simultaneously -- one on each side of the joint. Add preheat insulation based on temperature requirements.

Features

What's Included

  • Air-Cooled Quick Wrap

Not Included

  • ArcReach Heater
  • ArcReach Heater Extension Cable
  • Preheat Insulation
  • Contact Thermocouple Sensor (probe)
  • High-Temperature Rope
  • Thermocouple Wire
  • Thermocouple Connectors
  • Thermocouple Attachment Unit

Specifications

General Specifications

Title Air-cooled Quick Wrap
Industries Interests Construction and Fabrication
Net Width 6.5 in
Net Height 3.7 in
Net Length 62.75 in
Net Weight 15 lbs
Warranty 0.25 Years
Miller's True Blue Warranty

Accessories

Preheat Insulation 204669
Preheat Insulation, Woven silica, 1/2 in. x 6 in. x 240 in.

Used for preheating with induction heating cables and quick wrap.
Preheat Insulation 204669
Preheat Insulation 0.5 in. x6 in. x120 in.

Used for preheating with induction heating cables and quick wrap.
Preheat Insulation 204669
Preheat Insulation, Woven silica, 0.5 in. x 12 in. x 120 in.

Used for preheating with induction heating cables and quick wrap.
Contact Thermocouple Sensor-Probe 301517
Thermocouple (TC) Temperature Sensor (contact probe)

Contact thermocouple sensor is placed on the part being heated and provides temperature feedback to the ArcReach Heater.