Robotic Welding Automation- PerformArc™ Side-by-Side Cells - MillerWelds

PeformArc 1100SS

PA1100SS
Compare

Features

24/7/365 Support Line
Support Hotline provides customer service and parts support.
Extremely High Productivity
Station indexing time is eliminated allowing robot to immediately begin welding on station B when station A is complete.

120" span between the head and tail stock with 1100 lb. capacity on each side.

Available dual robot configuration allows a second robot to be added, theoretically doubling throughput with no additional floor space required.

GMAW and GTAW applications.
Full Range of Welding Processes
AccuPulse
AccuCurve
TAWERS
SP-MAG II
100% CO2
RMD
Active Wire Process -low energy short circuit and zero spatter.
GMAW-P
GTAW -with and without filler Aluminum -low pulse, dual pulse, synchronized weaving
Servo Push-Pull Torch
Arc Data Monitoring
Offline Programming -DTPS
Load Station Flexibility
Standard load station jogging provides complete load position flexibility, allowing multi-stage loading or tack and finish welding to occur in a common welding fixture.

Servo Positioners allow the parts to be rotated into the desired welding position, maximizing torch access and welding quality.
Long Term Support and Reliability
Setting the standard in the welding industry for quality, reliability and productivity since 1996. The PerformArc is backed by Miller today and tomorrow.
Safety and Performance
Designed in accordance with ANSI/RIA R15.06-2012, UL1740, NFPA 79 and CSA Z434.

L-shaped light curtains, interlocked safety gates, dual channel safety circuit, two stationary arc flash barriers and solid sheet metal wall panels.

Servo disconnect technology removes drive power during fixture loading to prevent unexpected motion of the outboard axis.
Quick Assembly
A fully welded frame, pre-wired and pre-assembled ships in three sections for quick assembly.

Specifications

Processes

MIG (GMAW)
TIG (GTAW)

General Specifications

Title PeformArc 1100SS
Industries Interests Automotive Manufacturing
Fabrication
Manufacturing
Input Voltage 460/480 V
Input Phase 3-Phase
Input Hz 60 Hz
Net Width 168 in
Net Height 90 in
Net Length 196 in
Net Weight 7600 lbs
Portability Fork Pockets
Cell Type Side by Side (Walk around)
2 Split Station Servo
Table Type Open bed
Multi Robot Capable Yes (2)
Table Payload 1100 lb
Headstock Tailstock Span 120 in
Payload 1100 lbs at each weld station (2)
Main Axis Rotation Height 33 in
Main Axis Rotation Diameter 44 in

Resources

Articles

Shop floor featuring two Miller pre-engineered robotic welding cells and parts bins
Welding robot welding on fixtured part

Videos