For use with 1200 Amp Twin-Wire Torch
For use with 1200 Amp Twin-Wire Torch
Bernard® AccuLock™ S consumables feature an enchanced contact tip-to-diffuser design. The contact tip is 60% buried within the diffuser for less exposure to the heat of the weld and more cooling from shielding gas for 2-3x longer life.
For use with Tregaskiss MIG Guns or Bernard BTB, TGX, T-Gun and Clean Air MIG Guns
Bernard® AccuLock™ S consumables feature an enchanced contact tip-to-diffuser design. The contact tip is 60% buried within the diffuser for less exposure to the heat of the weld and more cooling from shielding gas for 2-3x longer life.
For use with Bernard® MIG Guns
Bernard® Quik Tip™ contact tips install with one quick twist.
For use with MDX™-250 MIG Guns and Bernard® BTB MIG Guns; Pair with Heavy Duty Diffusers, Nozzles and Front Load Liners and Power Pin Caps.
For use with Bernard® IronPro™ Series Self-Shielded (FCAW) Gun.
Bernard® Quik Tip™ contact tips install with one quick twist.
For use with 1200 Amp Twin-Wire Torch
Bernard® Quik Tip™ contact tips install with one quick twist.
For use with MDX™-250 MIG Guns and Bernard® BTB MIG Guns. Pair with Heavy Duty Diffusers, Nozzles and front load liners and Power Pin Caps.
For use with Tregaskiss MIG Guns or Bernard BTB, TGX, T-Gun and Clean Air MIG Guns
Bernard® AccuLock™ S consumables feature an enchanced contact tip-to-diffuser design. The contact tip is 60% buried within the diffuser for less exposure to the heat of the weld and more cooling from shielding gas for 2-3x longer life.
Bernard® Quik Tip™ contact tips install with one quick twist.
For use with Bernard® BTB MIG Guns. Pair with AccuLock™ S Diffuser, Nozzles and Front Load Liners and Power Pin Caps
For use with MDX-250 MIG Guns and Bernard BTB MIG Guns. Pair with Heavy Duty Diffuser, Nozzles and Front Load Liners and Power Pin Caps
Recommended for brazing copper pipe 1/2" - 3/4" (12 mm - 19 mm) in diameter. This tip can also be threaded on Versa-Torch™ Adaptors depending on fuel gas - Adapter AT40 for acetylene and Adaptor AT41 for propane, natural gas or propylene.
Bernard® AccuLock™ S consumables feature an enchanced contact tip-to-diffuser design. The contact tip is 60% buried within the diffuser for less exposure to the heat of the weld and more cooling from shielding gas for 2-3x longer life.
For use with MDX-250 MIG Guns and Bernard BTB MIG Guns. Pair with Heavy Duty Diffuser, Nozzles and Front Load Liners and Power Pin Caps.
For use with Miller MDX™-250 and Bernard® BTB MIG Guns. Pair with Heavy Duty Diffuser, Nozzles and Front Load Liners and Power Pin Caps.
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
For use with Bernard® MIG Guns
For use with Bernard® MIG Guns
For use with Bernard® MIG Guns
Replacement tip designed for .023 inch (0.9 mm) solid or flux-cored welding wires. For use with all M-Series MIG guns
For use with all M-Series MIG guns
For use with all M-Series MIG guns
Replacement tip designed for .035 inch (0.9 mm) solid or flux-cored welding wires. For use with all M-Series MIG guns
For use with Bernard MIG Guns
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
For use with Bernard® MIG Guns
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
For use with Bernard® MIG Guns
For use with Bernard® MIG Guns
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
For use with Bernard® MIG Guns
For use with Bernard® MIG Guns.
For use with Bernard® MIG Guns
Bernard® Centerfire™ contact tips have a tapered base to improve conductivity.
For use with MDX MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Liners and Power Pin Caps.
For use with MDX™ MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Front Load Liners and Power Pin Caps.
For use with MDX™-100 MIG Guns. Pair with Standard Duty Diffuser, Nozzles, Liners and Power Pin Caps.
For use with MDX™ MIG Guns. Pair with Standard Duty Diffuser, Nozzles, Front Load Liners and Power Pin Caps
Package of 5 0.030 MIG contact tips with 0.030 M5 x 0.8mm thread for use with Miller Spoolmate and Hobart spoolguns.
0.035 MIG contact tips with 0.035 M5 x 0.8mm thread for use with Miller Spoolmate and Hobart spoolguns.
For use with MDX MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Liners and Power Pin Caps.
For use with MDX™ MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Liners and Power Pin Caps.
For use with MDX™ MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Liners and Power Pin Cap.
For use with MDX MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Liners and Power Pin Caps.
For use with MDX™ MIG Guns. Pair with Standard Duty Diffusers, Nozzles, Liners and Power Pin Caps
For use with Spoolmate 100, 185 and 200 MIG guns