ArcReach® SuitCase® Feeder | MillerWelds

ArcReach® SuitCase® 8 , Bernard™ BTB 300 A Gun Pkg

951726001
Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!
Compare

SuitCase 8 Q300 Gun
951726001

SuitCase 12 Q300 Gun
951729001

SuitCase 12 S-Gun
951730

SuitCase 12 Dura-Flux Gun
951731

SuitCase 12 Q300 Gun for Pipe
951732

Suitcase 12 Heavy Duty
301604

SuitCase 8 S-Gun
951727

SuitCase 8 Dura-Flux Gun
951728

Smart Feeder, PipeWorx Q300 Gun
951733

Features

What's Included

  • ArcReach® SuitCase® 8
  • .045 - 1/16 reversible dual VK drive rolls
  • Bernard™ BTB Gun 300 AMP, 15FT
  • CENTERFIRE contact tips, .045 (QTY 3), .052 (QTY 2)
More Jobsite Productivity and Efficiency
ArcReach® capabilities eliminate the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make adjustments at the ArcReach wire feeder or remote.
Cable Length Compensation
Cable Length Compensation (CLC™) ensures that the voltage a weld operator sets is the voltage they get by automatically adjusting voltage based on weld cable length, even hundreds of feet away from the power source.
Setting the Standard for Performance
Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next, which provides consistent arc quality. Front panel has trigger hold, wire jog, and gas purge for easy operator access. Wide voltage range for small and large wires with no contactor chatter or arc outages.
Unique and Durable Case
Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants. Built-in slide rails allow you to drag the feeder into position for welding. Innovative feeder door design allows you to change wire while feeder is standing upright or laying down.
Extreme Reliability
Potted and trayed main printed circuit board for the harshest environment adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation. Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun. Gas inlet recessed into back of case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
Ultra-low Drag Inlet Guide Pins
Makes loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance.
Scaled Wire Pressure Knob
Provides easy adjustment and consistent pressure on the drive rolls and wire.
Digital Meters with SunVision™ Technology
Display voltage, wire feed speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
Sizing
12VS model is sized for an 8- or 12-inch spool of wire. 12-inch spools are the most common in structural steel and fabrication.
AccuLock S Consumables
AccuLock can transform the way businesses manage their MIG welding gun consumables – helping to optimize productivity, operating costs, and welder confidence. Less tip changes, less troubleshooting, and more beads worth bragging about!   Learn More

Specifications

Processes

Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title ArcReach® SuitCase® 8 , Bernard™ BTB 300 A Gun Pkg
Portability Handle(s)
Net Width 7.25 in
Net Height 12.75 in
Net Length 18 in
Net Weight 28 lbs
Warranty Miller's True Blue Warranty

Accessories

SuitCase X-Treme and SuitCase RC Flowmeter Kit

Customer Configured Bernard Gun

Spool Adapter (14LB Coil)

Permits 14 lb. (6 kg) coils of wire to be mounted on 2 in (51mm) O.D. feeder spindles.

Consumables

Bernard™ TGX™ MIG Gun, 260A, 15 ft., 0.045 in. $386.00

Bernard™ TGX™ MIG Gun, 260A, 15 ft., 0.035 in. $386.00

Ironmate™ Fluxed Cored Gun 350 Amps, 15 ft $854.36

.045 V-Knurl Drive Roll Kit $115.88

Recommended for feeding flux cored wires

Resources

Literature

ArcReach Product Selector Guide
ArcReach Flow Chart
ArcReach Infographic
Construction Brochure
XMT 350 FieldPro Interactive PDF

Videos

Avoid Voltage Drop to Improve Weld Quality on Jobsites
Voltage drop can cause poor weld quality and costly rework. Learn more about what causes voltage drop and how to prevent it.
Apex Steel Improves Productivity and Jobsite Safety With ArcReach Technology
Apex Steel needs welding operators to be efficient on the jobsite, so they got Miller's ArcReach® for complete control of...
Apex Steel Saves up to Two Hours Per Welder Per Day
Remote control welding technology from Miller helps structural steel contractor Apex Steel save time and meet quality...