XMT® 304 and 350 Multioperator Welding Racks | MillerWelds

XMT® 450 CC/CV 230/460 V, ArcReach™, 4-Pack Rack, 1/2 in. studs, fused for 460 V

907700
Conveniently houses multiple power sources, an ideal system for onsite applications including construction and shipbuilding.
Compare
Spec Sheet (English) Spec Sheet (English) Spec Sheet (English) Spec Sheet (Spanish) Spec Sheet (Spanish)

Features

Environmental Protection
Meets IP23, which is more stringent than IP23S or IP23M ratings, providing the most reliable outdoor package.
Protected from the elements
The electrical junction box is located well under the galvanized roof panel. Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh environments.
Easy to move
Lifting eyes simplify transportation using crane or overhead lifting device. Lift truck side and end fork pockets in base to enable loading and worksite repositioning with fork lift.
Protected Electrical Connections
Liquid-tight strain reliefs provided on both welding power source and electrical junction box. Strain relief is designed to resist salt water, alcohol, oil, grease and common solvents.
Work Terminal
Isolated work terminal provides a convenient connection point for common workpiece construction
ArcReach® Technology
ArcReach capabilities increase jobsite productivity and efficiency by eliminating the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make voltage adjustments at the ArcReach wire feeder or remote.   Learn More
Auto-Process Select™
Automatically sets the power source to the correct weld process based on the polarity applied to the weld accessory and decreases the chance of an incorrect weld process.
Primary Power Connection
One easy connection allows multiple welders to be connected with one primary power drop.
Increased Productivity & Safety
More arc-on time, and reduced exposure to slip, trip, and fall hazards can be realized using ArcReach because less time is spent going back to the welding power supply to set process and arc amperage or voltage.

ArcReach® Heating Systems

Spending Too Much Time and Money on Weld Preheating?

Specifications

Processes

Air Carbon Arc Cutting and Gouging (CAC-A)
Stick (SMAW)
TIG (GTAW)
Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title XMT® 450 CC/CV 230/460 V, ArcReach™, 4-Pack Rack, 1/2 in. studs, fused for 460 V
Applications Fabrication
Mobile Fabrication & MRO
Refineries and Power Plants
Industries Construction & Fabrication
Manufacturing
Railcar
Shipbuilding
Connector Style 1/2 inch studs
Weldable Metals Aluminum
Specialty Metals
Stainless Steel
Steel
Rated Carbon Diameter 5/16 in (7.9 mm)
Current Type DC
Max Open Circuit Voltage 90 VDC
Rack Capacity 4
Portability Fork Pockets
Lift Eye (Standard)
Running Gear / Cart (Optional)
Weld Output CC / CV
Input Voltage 460/480 V
Input Hz 60 Hz
Net Width 43 in
Net Height 34 in
Net Length 59.375 in
Net Weight 780 lbs
Warranty 3 Years
Miller's True Blue Warranty

Accessories

SuitCase® 12RC Wire Feeder

Portable feeder, with standard remote voltage control, for applications where the feeder is within 100 feet of the power source and control cords are acceptable.
Rack Running Gear

Resources

Videos

How to Weld With T-8 Wires on the Jobsite – Tips and Tricks
Learn best practices for converting to welding with T-8 self-shielded flux-cored wire on the jobsite.
6 Tips for Code-Quality Structural Root Passes
Learn best practices for a vertical-up, full-penetration structural root pass on a groove weld with self-shielded flux-...