Rugged enclosure provides simple means for protecting and transporting multiple welding power sources for construction, maintenance/repair and shipbuilding applications.
Accommodates any combination of four XMT 350 power sources that will fit into an empty XMT Rack. Order fuse kit separately for appropriate power supply and intended primary voltage.
Rugged enclosure provides simple means for protecting and transporting multiple welding power sources for construction, maintenance/repair and shipbuilding applications.
Accommodates any combination of four XMT 450
power sources, or six XMT 304 or XMT
350 power sources will fit into an empty
XMT Rack. Order fuse kit separately for
appropriate power supply and intended
primary voltage.
Pipe post is required to mount Swingarc
to Swingpak base or floor.
Pipe post is required to mount Swingarc
to Swingpak base or floor.
For use with 8-, 12- or 16-foot Swingarcs.
Each base accommodates a power source, Swingarc, feeder system, water coolant system, and gas cylinder.
Ideal for demanding applications. Rated 200 amps, 60% duty cycle.
Ideal for demanding applications. Rated 200 amps, 60% duty cycle.
Extends Spoolmatic away from the control
box. Convenient plug-in connections.
Includes gas hose, control cord, and weld
power cable with International-style
insulated connector. For Spoolmatic only.
Extends Spoolmatic away from the control box. Convenient plug-in connections. Includes gas hose, control cord, and weld power cable with International-style insulated connector. For Spoolmatic only.
For use with Spectrum 875 or 875 Auto-Line
For use with Spectrum 625 X-TREME, 875 or 875 Auto-Line
For use with Spectrum 875 Auto-Line
Protects gun hose and cable assembly from wear and abrasion. Features full length hook-and-loop closure for ease of maintenance or replacement.
Dryer will remove water, dirt and oil as small as one micron with 99.9 percent efficiency. Can be mounted on plasma cutter or on wall. Install as close as possible to point of air consumption. For use with the Spectrum 875 and 875 Auto-Line.
Designed to put spool hub assembly at 36 inches from base for easier wire spool installation.
Spare or replacement spool canister for Spoolmatic and Spoolomatic Pro guns.
For 20,70 and Intellx series single-wire models and left side of dual-wire models.
For right side of dual-wire models
Permits 14 lb. (6 kg) coils of wire to be mounted on 2 in (51mm) O.D. feeder spindles.
For 60 lb (27 kg) coil. Helps protect the welding wire from dust and other contaminants. Reel Cover cannot be installed if the wire drive assembly is in a rotated position.
Dual-function, back-lit LCD digital meter
with selector switch. The digital meter
allows the wire feed speed to be preset in
inches per minute or meters per minute.
The voltage function, if used with a
current Miller-manufactured, electronically
controlled, constant-voltage power source,
allows the arc voltage to be preset and
monitored on the digital display. When
used with voltage control #194 211.
Easily roll shielding gas cylinders on and off the rack, and store two bottles of gas, gun and cables off the floor
Store gun and cables off the floor.
Makes measuring your metal easy
Used for suspending feeder over work area.
For CC, CV or CC/CV welding power sources - Provides easy way to change welding process. Also includes features of Polarity Control.
A WC-24 is required to operate Spoolmatic and
Spoolmatic Pro guns with 14 Pin Miller CV power sources and engine drives. Not required with Millermatic machines - check your literature for typical installations.