Millermatic Setup | MillerWelds

Millermatic 141 MIG Welder Setup Videos

Setting up your Millermatic 141, 190 or 211 MIG welder

Before setting up your Millermatic 141 or 190 MIG welders, review important safety important information. Watch for step-by-step instructions for setting up and operating your new Millermatic, the parts and components included with your equipment, and suggestions for the correct gas and consumable usage with the equipment.

Millermatic 141 and 190 MIG Welders: New Quick Select Drive Roll

Millermatic 141 and 190 MIG welders feature an angled all-aluminum wire drive and Quick Select Drive roll for improved feedability.

Miller Millermatic Flux Cored MIG Welding

How the process works for both self-shielded and gas-shielded wires, and where to set polarity.

Millermatic 211 MIG Welder Setup Videos

Changing Polarity on Millermatic 211

Miller weld engineer Zach MacMullen explains how to change the polarity on a Millermatic® 211 MIG welder. Change from DC positive to DC negative.

Millermatic 211 Spool Gun Calibration Procedure for Auto-Set Aluminum Spool Gun Option

Watch this video for step-by-step instructions on how to complete the Millermatic 211 calibration procedure. Doing so will allow welding operators to use Auto-Set aluminum spool gun option on the Millermatic 211 MIG welder.

Setting up your Millermatic 141, 190 or 211 MIG welder

Before setting up your Millermatic 141 or 190 MIG welders, review important safety important information. Watch for step-by-step instructions for setting up and operating your new Millermatic, the parts and components included with your equipment, and suggestions for the correct gas and consumable usage with the equipment.

Millermatic 252 MIG Welder Setup Videos

Welding Aluminum with Miller's Millermatic MIG Welders

Miller Millermatic Flux Cored MIG Welding

How the process works for both self-shielded and gas-shielded wires, and where to set polarity.

Miller Millermatic MIG Welding Troubleshooting

How to prevent and fix: birdnesting of the wire; burnback of the contact tip; poor gas coverage; exceeding the machine duty cycle; and thermal overload of the machine.

Millermatic 255 MIG Welder Setup Videos

Getting Started With Your Millermatic 255 MIG Welder

With the Millermatic® 255, you can count on years of trouble-free welding. Follow these instructions to set up your new machine.

Set up Weld Screen on the Millermatic 255 and Multimatic 255

When using your Millermatic® 255 or Multimatic® 255 in the manual mode, follow these guidelines to customize the weld settings.

Setting up Your Millermatic 255 or Multimatic 255 for MIG

Ready to MIG weld with your new Millermatic® 255 or Multimatic® 255 welder? Follow these steps to get started.

Millermatic 350P MIG Welder Setup Videos

Millermatic 350 Set Up

Setting Up the XR™-AlumaPro™ Push-Pull Gun with the Millermatic 350P

An overview of proper set up for the XR™-AlumaPro™ Push-Pull Gun with the Millermatic 350P, an optimized combination for aluminum welding.

Millermatic 350P MIG Welder Re-Linking Set Up

This procedure explains how Re-Link the Millermatic 350P for the appropriate input power.