Wire Feeders Including Portable, Semiautomatic and More - Miller | MillerWelds

D-74 Boom With Drive 8Ft

300521

Specifications

General Specifications

Title D-74 Boom With Drive 8Ft

Accessories

Pipe Post 4 FT w Base 149838
Pipe Post (4ft w/base)

Pipe post is required to mount Swingarc to Swingpak base or floor.
Pipe Post 4 FT w Base 149838
Pipe Post (6ft w/base)

Pipe post is required to mount Swingarc to Swingpak base or floor.
Spool Carrier 300352
Single /Dual spool carrier for 6 ft. pipe post on Swingarc

Designed to put spool hub assembly at 36 inches from base for easier wire spool installation.
Swingpak 12 Base

For use with 8-, 12- or 16-foot Swingarcs. Each base accommodates a power source, Swingarc, feeder system, water coolant system, and gas cylinder.

Consumables

1370270
Drive Roll Kit .035/.045 V-Gr 4 Roll

Recommended for feeding solid wires
M00340 TGX 260 Gun Left
Bernard® TGX™ MIG Gun 260A, .035 in., 15 ft. with Miller® Power Pin

The TGX Ready To Weld program offers pre-configured, factory-assembled MIG guns with all the components needed to start welding right out of the box.
M00340 TGX 260 Gun Left
Bernard® TGX™ MIG Gun 260A, .045 in., 15 ft. with Miller® Power Pin

The TGX Ready To Weld program offers pre-configured, factory-assembled MIG guns with all the components needed to start welding right out of the box.
Kit, 60/70 Series, .035 V-GR 4 Rolls

Includes inlet guide, intermediate guide, antiwear guide and drive rolls for hard wire.