310 Series High-Purity Corrosion-Resistant Single-Stage Cylinder Regulators
Designed to prevent contamination of high purity systems using corrosive, non-corrosive or toxic gases.
Dynasty®
The Dynasty® family of TIG welders makes it easier than ever to tackle complex jobs and materials with precision. And the intuitive interface and operating procedures allow you to get under the hood faster so you can crush your to-do list sooner.
320 Series High-Purity Corrosion-Resistant Two-Stage Cylinder Regulators
Precise, stable pressure regulators for high-purity applications with corrosive and noncorrosive gases.
630 Series Low-Flow Two-Stage Regulators
Designed for precise low-flow non-corrosive gases, stainless steel diaphragm, sintered filters.
810 Series Piston-Sensor Analytical Regulators
Designed for non-corrosive gases. Reliable for purging, charging and labs.
Combination Torch Handles
Designed for compatibility across multiple cutting, heating, and welding attachments.
Dimension™ 452
Dimension power sources provide outstanding versatility, and are designed for heavy industrial welding applications, with 100 percent duty cycle for extended arc-on time.
Dimension™ 652
Dimension power sources provide outstanding versatility, plus the endurance to handle demanding industrial applications, with 100 percent duty cycle for extended arc-on time.
Dura-Flux™
Built to optimize comfort and meet the demands of heavy-duty self-shielded flux-cored applications.
Dynasty® 700
Dynasty 700 TIG Welder by Miller Welders. Compact power source capable of welding up to 1” aluminum. Smooth and precise arc for welding exotic materials.
Heavy-Duty Combination Torch and Tip Packs
An easy way to update your oxy-fuel setup. Includes heavy-duty cutting attachment, handle and a selection of tips.
Heavy-Duty Flowmeters
Rugged-industrial grade design for demanding MIG / TIG welding applications. Can be attached to regulators or pipeline installations.
Heavy-Duty Single-Stage Flowmeter Regulators
Rugged-industrial grade design for demanding MIG / TIG welding applications.
Heavy-Duty Two-Stage Flowmeter Regulators
Designed to reduce flow fluctuations from changing inlet pressures for use in applications that need consistent results.
MC 500 Series Medium-Duty Cutting Attachments
Ideal for everyday cutting needs. Cuts up to 6 inches.
MDX™-250 EZ-Select™
250A output with EZ-Select trigger, rubber-overmold handle, rear swivel, optimized wire-feed.
Medium-Duty Flowmeters
Reliable flow performance for routine MIG / TIG welding applications. Designed for regulators or pipeline installations.
Medium-Duty Single-Stage Dual Flowmeter Regulators
Dual flow control lets two welding applications run from one cylinder.
Millermatic® 211
Welds material from 24 gauge - 3/8 in. thick in a single pass. Find Millermatic 211 product specifications, features, and reviews.
MT600 Series Medium-Duty Acetylene Heating Tips
For general heating of metals, brazing, and hard surfacing.
Multimatic® 215
DC TIG, MIG, flux-cored, and stick welder featuring Auto-Set™ Elite. 120V or 240V input power.
Powered Air Purifying Respirators (PAPR II)
Welding respirator. 2.2 lb blower. 8 hr battery. Dualtec 6-point cooling. HEPA, 2 batteries.
Quickbraze™ Outfits
Complete system to deliver efficient, targeted brazing for refrigeration and air conditioning.
SC 200 Series Heavy-Duty Cutting Attachments
Ideal for heavy duty cutting requiring high gas flow. Cuts up to 8 inches.
SC40 Series Heavy-Duty Propane, Natural Gas Cutting Tips
Heavy-duty propane / natural gas cutting tips with medium preheat for general hand cutting.
SC46 Series Heavy-Duty Propane, Natural Gas Cutting Tips
Heavy-duty propane / natural gas cutting tips for cutting dirty or heavily coated metals.
Series 40™ Heavy-Duty Single-Stage Cylinder Regulators
Rugged, heavy duty design for high flow applications. Stainless steel diaphragm allows use with liquid gases.
ST600 Series Heavy-Duty Acetylene Heating Tips
Provides high heating performance with propane and natural gas.
ST800 Series Heavy-Duty Propane, Natural Gas Heating Tips
Provide high heating performance with propylene gas.
Syncrowave® 210
The easy-to-use Syncrowave® 210 provides legacy arc performance that allows you to expand your capabilities with an all-in-one package.
Tag-A-Long™ Outfits
XMT® 350
Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 350 CC/CV is the most popular model for its flexibility and simplicity.
XR™ Control
Simple, cost-effective push-pull wire feeder for fabrication and manufacturing – for use with a push-pull gun. Beneficial for feeding aluminum wire.
Reimagined Dynasty® Family
Features
Dynasty welders are purposefully engineered with features and benefits that maximize the quality and precision of your TIG welds while increasing the throughput of your operation.
Reduce Training Costs
Field trials have shown a reduction of up to $1,750 in training costs per machine over the typical replacement cycle.
More Operator Control
71% of users expect that this machine will allow them to take on projects with more complex materials and designs.
Increase Productivity
Gain up to $2,450 back in lost revenue per machine due to ease of use, reduced errors and increased throughput.
Ease of Use
39% increased ability to utilize the machine's full capabilities.