Running gear allows easy movement around jobsite and rugged cage with cable holders protects your investment. For use with Bobcat 230/265 and Trailblazer 330 Gas and LP models.

Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder. Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder. Cover fits Bobcat™ 230/265 Gas & LP Models and Trailblazer® 330 Gas Models (except Air Pak™) WITH Protective Cage or Running Gear. To ensure proper fit, verify the tailpipe location on the engine-driven welder.

With the Remote Output Panel Kit, you can locate your engine-driven welder's output panels at the point of use, so you don’t need to climb onto the truck as often — one more way to redefine where you work.

Field mandatory when operating on California grasslands, brush or forest-covered land, and all National Forests. For other aeras, check your state and local laws.

NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120-240-volt plug to common Millermatic® and Spectrum® 240-plus. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).

Ability to wire for 120 or 240 VAC loads. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).

Rugged cage with cable holders protects your investment. Can be used with running gear, gas cylinder mounting assembly, or trailer. For use with Bobcat 230/265 and Trailblazer 330 Gas and LP models.

For Bobcats, Trailblazers, and Big Blue products under 25 horsepower. A highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension. Includes jack stand, 2-inch (50 mm) ball hitch, fenders and lights.

Provides an area to conveniently wrap weld cables and extension cords.

Miller's 2-in-1 accessory conveniently holds a 5lb. fire extinguisher and stores important documents such as owner's manuals, and job site specific paperwork. Compatible with HWY-Mid Frame and HWY-225 trailers.

Compact, 51 lb, 230/208V 1 PH unit provides plenty of power for 7/8 in. mild steel cutting.

Welds material from 24-gauge to 3/8 in thick in a single pass. Uses 120V or 240V power.

Easy-to-use and versatile MIG, Stick and DC TIG welder that helps build skills. Color screen featuring Auto-Set™ Elite. This all-in-one welder connects to 120 or 240 volt input power. Welds up to 3/8” mild steel.