Digital Elite Series Welding Helmets - MillerWelds

Digital Elite™, Blue Flame

Versatile Helmets for Demanding Applications
  1. Compare


Improved Digital Controls
Intuitive design and large push buttons allow user to easily adjust mode and settings.
Redesigned Headgear
Features additional adjustability settings and enhanced support for better fit and comfort.
Four Arc Sensors
Four independent arc sensors provide superior lens response for obstructed or low amp welding.
Four Operating Modes
Weld, Cut, Grind, and X-Mode provide ultimate versatility.
Electromagnetically senses the weld to eliminate sunlight interference and continuously detects the arc even if sensors are blocked.
Lens automatically turns on at the strike of an arc.


General Specifications

Title Digital Elite™, Blue Flame
Arc Sensors 4
Colors Patterns FLAMES
Delay Control
Grind Mode
New Headgear
Low Amp TIG Rated
Low Battery Indicator
Modes Cut
Reaction Time 1/20,000
Sensitivity Control
Shell Material Nylon
Shade Range 5-8, 8-13
Viewing Field 9.22 in
Net Width 10.25 in
Net Height 8.5 in
Net Length 12 in
Net Weight 1.13 lbs
Warranty Miller's True Blue Warranty



Reviews & Ratings

Rated 4 out of 5 by from Love the Helmet I've had mine for 10+ years.. never had a problem other than replacing wear items. I only have 2 problems with it: 1. when the batteries die it fails to off and you can"t weld anymore, and 2. the batteries are a tad on the expensive side.
Date published: 2016-10-02
Rated 3 out of 5 by from Excellent Eye Protection BUT This thing is HEAVY. The hood will not stay up, and it will not stay on your head. It's a battle to use which is a shame. Great eye protection in comparison to a few other brands I have used, but it leaves a few things to be desired.
Date published: 2016-09-16
Rated 5 out of 5 by from great helmet Ive been using digital elite helmets for 7 years and love them. I had lens crack but replaced by the dealer i bought it though. I highly recommend the helmet
Date published: 2016-01-23
Rated 3 out of 5 by from Not a bad helmet I bought the helmet and after a week, would only work in "X" mode. I took it back to the dealer, they took another helmet off the shelf and gave it to me, no questions asked. Took the second helmet back and it did the same thing after a day. Still using it 2 years later. It is a fairly good helmet, the detents won't keep the helmet up when in raised position. It isn't then easiest helmet to see the weld puddle with, I have an old Jackson non Auto shade 10 that I can see the puddle better with.
Date published: 2015-12-09
Rated 1 out of 5 by from Piece of Junk This welding hood is not worth a dollar hardly any use on mine and the auto darkening just flickers on and off. Don't expect help from miller when this product fails your just stuck with an expensive hunk of junk.
Date published: 2015-11-05
Rated 5 out of 5 by from awesome local 56 Can't beat this helmet. Im spoiled.. Autoshade..15 yrs in the trade...had this for at least 7 .. 8..years..I got old display..replaced questions asked..same she'll...keep pounding the wire..peace:-)
Date published: 2015-09-19
Rated 4 out of 5 by from This is a good helmet, not great I bought the hood, after a week, would only work in X Mode, took it back local store replaced it on the spot, worked for a another week, did the same thing again. Have used it that way for 2 years. Headgear is very flimsy and the hood won't stay up. Optices are not bad, but have friends with an Optrel and a Lincoln, just as good. Lincoln is less money, Optrel more. Not a bad hood, just average in my opinion
Date published: 2015-08-21
Rated 5 out of 5 by from First miller helmet and I'm hooked! This was the first miller auto darkening helmet I have ever used. It work flawlessly from low amp TIG welding to your high voltage flux core. Very pleased and would purchase again.
Date published: 2015-08-18
  • 2016-10-23T09:54CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_81
  • loc_en_US, sid_269273, PRD, sort_mostRecent
  • clientName_MillerElectric