Includes flowmeter regulator with 10-foot (3 m) gas hose, 10-foot (3 m) 4/0 feeder weld cable with lug connector on one end and a lug on the other, 15-foot (4.6 m) work cable with lug connector on one end and 600-amp C-clamp on the other.

Simple and cost-effective two drive roll wire feeder for industrial manufacturing and fabricating.

Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C). Includes heater and extension cable - requires selection of either air-cooled cable(s) and/or air-cooled quick wraps as heating tools.

Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C). Package includes heater, extension cable and two air-cooled quick wraps for heating tools.

Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C)

Air-cooled cables or quick wraps connect to the side of the ArcReach Heater. Up to six thermocouple sensors connect to the yellow panel and provide temperature feedback from the piece that is being heated.

Works on pipe with outside diameter of 10-1.5 inches and up to a 600° F (315°C). Most joints will require two quick wraps to be used simultaneously -- one on each side of the joint. Add preheat insulation based on temperature requirements.

Preheat Insulation with hook and loop straps for retaining induction heating cables in various configurations. Ideal for heating repetitive parts or hanging with sewn-in grommets.

Ideal for securing induction cables.

The ArcReach SuitCase 12 Heavy Duty model is specifically designed for applications using 3/32-inch wire. Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to ArcReach technology — and improve your bottom line!