Deltaweld® 500 230/460V MIGRunner™ with Intellx™Pro Feeder

Deltaweld® 500 230/460V MIGRunner™ with Intellx™Pro Feeder

951808
The manufacturing solution for welders of all skill levels, now offering pulse capabilities in an integrated package.
Compare

MIGRunner w/Intellx Pro Feeder
951808

MIGRunner w/Intellx Feeder
951814

MIGRunner w/Intellx Pro Dual Feeder
951820

MIGRunner w/Intellx Dual Feeder
951819

Deltaweld 500 575V MIGRunner w/Intellx Pro Feeder
951824

Deltaweld® 500 230/460V MIGRunner™ with Intellx™Pro Feeder & Insight Core™
951826

575V MIGRunner w/Intellx Pro Feeder & Insight Core
951827

Deltaweld 500 With ArcConnect
907785

ArcConnect, 14 Pin
907785001

Deltaweld® 500 230/460V With ArcConnect™ & Insight Core™
907785002

Deltaweld® 500 208-230/460V With ArcConnect™ & 14-Pin & Insight Core™
907785003

575V ArcConnect
907786

575V ArcConnect, 14 Pin
907786001

Deltaweld® 500 575V With ArcConnect™ & Insight Core™
907786002

575V ArcConnect, 14 Pin
907786003

Intellx Pro Wire Feeder Simulator Try Now >>

Features

What's Included

  • .035/.045 in. V-groove Drive Rolls
  • Bernard™ BTB Gun 400 A
  • Intellx™ Pro Wire Feeder
  • ArcConnect Control/Motor Cable 9ft
  • Cart Accessory Kit
  • Feeder Swivel Kit
  • Deltaweld 350/500 Running Gear/Cylinder Rack
  • Deltaweld® 500 with ArcConnect™
Easy to use
EZ-Set simplifies parameter setup based on material thickness, removing complexity and reducing welder training time.
Legacy meets pulse
Pulsed MIG-capable Deltaweld with Intellx Pro feeder provides a 28-percent wider operating window and a more forgiving arc, compensating for variations in operator technique. Welders of any skill level can get into production quicker. Make your move.
ArcConnect™
Next generation communication to improve weld performance and allow point-of-use controls to be located at the feeder.
Fan-On-Demand™
Operates only when needed reducing noise, power consumption, and the amount of airborne contaminants going through the machine.

Ready to weld
The Deltaweld System is shipped as a complete package with everything you need to get welding sooner. Just hook up your primary power, add gas, wire and a welding gun, and you're ready to weld.
Dedicated wire feeder options
• Intellx feeder — New arc control feature means welders can produce better welds with minimal parameter adjustments.
• Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
Gouge Mode
Deltaweld 500 has a dedicated constant current carbon arc gouge mode specifically designed to gouge up to 3/8" carbons.
Backwards Compatibility
A model is available with both ArcConnect and the standard Miller 14 Pin for use with older Miller wirefeeders.
Wind Tunnel Technology
Internal air flow that protects electrical components and PC boards from dirt, dust, debris— greatly improving reliability.

Specifications

Processes

Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title Deltaweld® 500 230/460V MIGRunner™ with Intellx™Pro Feeder
Industries Interests Manufacturing
Heavy Equipment Manufacturing
Railcar
Commercial Truck and Trailer
Portability Lift Eye (Standard)
Running Gear / Cart (Optional)

Resources

Videos

Reduce Grinding With Proper Work and Travel Angles
See how using the proper work and travel angles can help reduce or eliminate unnecessary grinding in your welding operation.
Check Weld Parameters and Travel Speed To Reduce Grinding
Proper weld parameters and travel speeds promote clean arc transfer and adequate fusion, helping to reduce unnecessary...
See How a Wider Operating Window Can Help Reduce Grinding
Pulsed MIG can deliver better fusion, a more forgiving arc and an up to 28% wider operating window over CV MIG to reduce...

Reviews & Ratings