Spoolmatic® 15A Spool Gun, 15 ft.
195156
Professional aluminum welder for industry and commercial use. Trusted by professionals.
1/7
Millermatic® 355 w/ XR-Aluma-Pro™ and EZ-Latch™ Running Gear
MIG Welder
951927
Selection Option
About The Millermatic® 355 w/ XR-Aluma-Pro™ and EZ-Latch™ Running Gear
Easy to use machine to increase efficiency and productivity for manufacturing and fabrication users. 7" Color LCD screen featuring Auto-Set™ Elite, Electronic Parameter chart, and Trigger Program Select. This all-in-one welder connects to any North American input power. Welds up to 1/2” aluminum, stainless and mild steel.
Features
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Trigger Program Select
Increases productivity by eliminating the need to go back to the machine to change weld settings. Simply tap gun trigger to select the program.
Versatility
Capabilities include MIG, pulsed MIG and flux-cored welding.
XR-Aluma-Pro air-cooled push-pull MIG gun with FasTip™ consumables
New lighter XR-Aluma-Pro guns reduce fatigue, improve output and are rugged to withstand industrial environments.
Portability - Machine only weighs 99 lb
Weight is reduced by more than 40 percent compared to the Millermatic 350P.
EZ-Latch™ running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
Generator Compatible
The Millermatic 355 will be able to operate and provide full output when powered by generators with 19000 Watt (19K) output or higher. Limited output will occur when used with smaller generators.
Locks and Limits
Provides control of the weld parameter ranges minimizing deviations from the welding procedure specifications (WPS).
USB Port
Provides the ability to easily update software, back-up settings and transfer saved weld programs from one unit to the next.
Input Voltage Selection Switch
Provides versatility to utilize any single- or three-phase North American power (208, 240, 460, 575 V). Location in the wire drive compartment provides the ability to manually switch input voltage. An error will display if wrong input selected.
Auto-Set™ Technology
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Setup & Software
Setup & Software
Find information on welding system setup, training and services to get the most out of your products.
Accessories
Consumables
Tech Specifications
Discover technical info about this product
Explore the Series
Millermatic® 211 PRO
MIG and flux cored 120 / 240V welder that welds up to 3/8-inch steel and aluminum.
Millermatic® 142
MIG and flux cored 120 V welder that welds from 24 gauge – 3/16 in. mild steel.
Millermatic® 355
MIG, Pulsed MIG and flux cored 208/240/460/575 V welder that welds from 22 gauge – ½ in. mild steel.
Millermatic® 255
MIG, Pulsed MIG and flux cored 208/240 V welder that welds from 24 gauge – 1/2 in. mild steel.
Millermatic® 252
MIG and flux cored 208/240 or 240/460/575 V welder that welds from 22 gauge – 1/2 mild steel.
Owner's Manuals
From safety precautions, operations/setup information, and maintenance, to troubleshooting and parts lists, Miller's manuals provide detailed answers to your product questions.