Multimatic Setup | MillerWelds

Multimatic 200 Multiprocess Welder Setup Videos

How to Change Nozzle, Tip, Diffuser, and Liner with Set Screw for MDX™ MIG Guns

Follow some simple step-by-step instructions to change AccuLock™ consumables on MDX™ MIG guns and gain an optimal wire feeding path.

How to Reinstall a Trimmed Liner for MDX™ MIG Guns with Set Screw Power Pin Cap

When the power pin cap is removed from a MDX™ MIG gun, the liner can retract and appear too short to lock into place. Learn how to reinstall the liner.

How to Set Up a Miller Multimatic 200 - Intro

Watch this how-to overview of the Multimatic 200 multiprocess welder to set up MIG, TIG and Stick welding.

Multimatic 215 Multiprocess Welder Setup Videos

Quick Tips for Setting MIG Welding Parameters

Learn how to set parameters when MIG welding so you get the best-looking welds possible, every time.

Tips for Maintaining Your MIG Welder

Regular welder maintenance will keep your machine performing in top shape. Follow these tips for common welder maintenance.

Multimatic® 220 AC/DC vs. Multimatic® 215

Multimatic 220 AC/DC Multiprocess Welder Setup Videos

Quick Tips for Setting MIG Welding Parameters

Learn how to set parameters when MIG welding so you get the best-looking welds possible, every time.

Engineered, Assembled and Supported in Appleton, Wisconsin: Multimatic® 220 AC/DC

Get an inside look at the plant where Miller® welders like the Multimatic® 220 AC/DC are engineered, assembled and supported.

TIG Welding Aluminum for Beginners Part 4: Setting Parameters

When TIG welding aluminum, learn how weld settings like balance and frequency can make a big difference in the final weld.

Multimatic 235 Multiprocess Welder Setup Videos

Quick Tips for Setting MIG Welding Parameters

Learn how to set parameters when MIG welding so you get the best-looking welds possible, every time.

Setting Up Your Multimatic® 235 Welding Power Source

Learn how to set up your new Multimatic 235 welding power source so it’s ready for MIG, stick or TIG welding.

Setting Up Your Multimatic® 235 For Flux-Cored Welding

Learn how to set up your new Multimatic 235 welding power source for self-shielded flux-cored welding.

Multimatic 255 Multiprocess Welder Setup Videos

Quick Tips for Setting MIG Welding Parameters

Learn how to set parameters when MIG welding so you get the best-looking welds possible, every time.

Short Arc to Pulsed MIG: Changing Processes With a Tap

Watch Roadster Shop fabricator Kellen Bain weld a spec Camaro chassis with the Multimatic® 255 multiprocess welder.

Multimatic 255 Multiprocess Welder Setup

The Multimatic® 255 delivers years of trouble-free welding. Follow these instructions to set up your new machine.