HDI Air Pak | MillerWelds

HDI™ 265 Air Pak™

907868
Powerful hydraulically driven all-in-one unit designed for the rugged work truck industry with air compressor, battery charge/crank assist, auxiliary power, multiprocess welding. This unit is designed with industry-leading technologies to provide the support and reliability you need on the job, while reducing payload for increased capabilities.
Compare

HDI™ 265 Air Pak™
907868

HDI™ 325 Air Pak™
907869

Spec Sheet (English)

Features

What's Included

  • User interface panel - includes 30 ft. (9 m) of cabling
  • Battery charge/crank assist panel
  • Weld output panel
Air Compressor
Rotary-screw compressor with 40 cfm (265 model) or 60 cfm (325 model) can power virtually any air tool, including most one-inch impact wrenches. The rotary-screw compressor reliably provides air on demand. Compressor oil heater included.
Battery Charge/Crank Assist
Produces up to 150 amps of DC current to quickly charge 12- and 24-volt batteries. It can provide jobsite equipment with weak batteries up to 300 amps of crank assist.
Generator power
7,000-watt generator that can handle most jobsite electrical needs — electrical tools, lights, and more. The optional auxiliary power panel provides two 120-volt GFCI-protected duplex receptacles and one 120/240-volt receptacle with 60 Hz current.
Integrated Multiprocess Welding
The HDI Air Pak provides multiprocess weld capabilities with 265 amps (265 model) or 325 amps (325 model) of output (100 percent duty cycle), so technicians are prepared for each welding job they encounter in the field.
Auto-Set™ Technology
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Direct Spool Gun Connection
Make it easy to weld aluminum. Expand the types of jobs you can take on. Adapters are no longer required with the integrated 10-pin connection. Optimized for Spoolmate™ and Spoolmatic® spool guns.
Hydraulic Cooling Only Mode
When output capabilities are not needed, disable the drive motor of the HDI Air Pak to keep the cooling system operating and cool hydraulic fluid when only other auxiliary hydraulic equipment is needed.

Specifications

Processes

Air Carbon Arc Cutting and Gouging (CAC-A)
Flux Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
TIG (GTAW)

General Specifications

Title HDI™ 265 Air Pak™
Applications Work Truck
Rated Carbon Diameter 1/4 in (6.4 mm)
Weld Output 265A @ 30V, 100% Duty Cycle
Single Phase Auxiliary Continuous Power 7000 W
Single Phase Auxiliary Peak Power 7500 W
Sound Rating No Load 62 dB @ 7 meters / Load 74 dB @ 7 meters
Compressor Brand Rotorcomp
Compressor Free Air Delivery 40 cfm (1.13 m3/min.)
Compressor Working Pressure 90 – 175 psig
Compressor Duty Cycle 100%
Compressor Automatic Shutdown High pressure (200 psi)
Hydraulic Max Pressure 3,000 psi
Hydraulic Flow Rate 11 gpm supply required
Battery Charge 12/24 V, 150 A
Crank Assist 12/24 V, 300 A
Chassis Power N/A
Compressed Air yes
Drive System Open Center Hydraulic
Net Width 21 in
Net Height 26 in
Net Length 33 in
Net Weight 465 lbs
Warranty 3 Years
Miller's True Blue Warranty

Accessories

951858 Ready to Work Accessory Kit
Ready To Work Accessory Kit

The ready to work accessory kit includes an auxiliary power panel, battery charge/crank assist cables and 50 ft. weld cables. This panel saves time and reduces the risk of injury by eliminating the need to climb into the truck bed.
25-foot Battery Charge / Jump Start Cables with 2 Pole Connector Plug and Clamps

For the EnPak® A30, EnPak® A60, HDI™ Air Pak™, Bobcat®, Trailblazer® featuring Battery Charge / Crank Assist 2-Pole Connection
Bobcat™ / Trailblazer® / Big Blue® Full KVA Adaptor Cord

NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120-240-volt plug to common Millermatic® and Spectrum® 240-plus. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).
KVA Plug
Bobcat™ / Trailblazer® / Big Blue® Full Single-Phase Full KVA Plug Kit

Ability to wire for 120 or 240 VAC loads. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).

Resources

Literature

HDI 265-325 Quick Start Guide
Integrated Work Truck Sales Territories Map

Related Items

HDI 325 Air Pak Front RF
HDI Air Pak

Powerful hydraulically driven all-in-one unit designed for the rugged work truck industry with air compressor, battery charge/crank assist, auxiliary power, multiprocess welding. This unit is designed with industry-leading technologies to provide the support and reliability you need on the job, while reducing payload for increased capabilities.
EnPak A60GBHW Right
EnPak® A60

For work truck fleet managers who want to take idle time off their trucks and insist on the most trusted and highest quality products, the new EnPak® A60 is the all-in-one solution that can be integrated into more of their fleet, delivering more capabilities for Class 5 and above truck configurations.
EnPak® A30

For work truck fleet managers looking to keep idle time off of their class 3 to 5 trucks, EnPak A30 is the quietest and most fuel-efficient All-In-One that maintains PTO driven power capabilities, including 12V DC, in a compact, lightweight solution backed by industry leading reliability and performance expected from Miller.

Bobcat 200 Air Pak Model
Bobcat™ 200 Air Pak™

The enhanced Bobcat 200 Air Pak is a quiet, fuel-efficient all-in-one that maintains power capabilities in a compact, lightweight footprint and is backed by industry-leading reliability and performance.