Miller Welder Generators - Bobcat 200 AirPak Diesel | MillerWelds

Bobcat™ 200 Air Pak™ Diesel

907760
For class 3 to 5 service truck operators looking to consolidate or improve reliability of their power equipment, the Bobcat 200 Air Pak Diesel is a quiet, fuel-efficient all-in-one that maintains power capabilities in a compact, lightweight footprint that’s backed by the industry-leading reliability and performance customers expect.
Spec Sheet (English)

Features

Compressed Air
The Bobcat 200 Air Pak provides 20 cfm of compressed air at idle or 30 cfm at full speed. The industrial rotary-screw air compressor easily outperforms and outlasts reciprocating compressors.
Battery Charge/Crank Assist
The Bobcat 200 Air Pak provides up to 100 amps of DC power to quickly charge 12- and 24-volt batteries. Jobsite equipment with weak batteries can get up to 300 amps of crank assist from the Bobcat 200 Air Pak.
Electric power
Electrical tools, lights and more. The Bobcat 200 Air Pak can power most jobsite electrical needs with 6,500-watts of auxiliary power.
Welding
The Bobcat 200 Air Pak can easily handle metal repairs with its 210 amp inverter-based welder that is capable of stick, DC TIG and MIG.
Increased payload
This all-in-one can replace a variety of other machines, reducing a work truck's weight and increasing its available payload - so operators can bring everything they need to the jobsite.
Significant fuel savings
The Bobcat 200 Air Pak can meet operator needs for compressed air, electrical power and welding capabilities - all while the work truck's engine is turned off. Highly efficient without sacrificing power, the engine in the Bobcat 200 Air Pak uses far less fuel than any work truck's engine, delivering savings on fuel costs that quickly add up.
Reduced maintenance costs
Turning off a work truck and turning on the Bobcat 200 Air Pak can reduce the truck engine's idle time by up to 75 percent. Less engine idle time means maintenance is required less often - so overall maintenance costs are reduced.
Reliable performance
Ruggedly built and rigorously tested to ANSI and CSA standards, the Bobcat 200 Air Pak is proven to withstand high temperatures, rain, salt, dust, impact, vibration and more. Its systems are tested to meet the highest-applicable industry safety standards.
Auto-Speed™ technology
Advanced Auto-Speed technology automatically adjusts engine speed to match weld and battery charge demands — reducing fuel consumption, maintenance costs and noise for a safer, more efficient jobsite.

Not Included

  • Personal safety products (helmet, gloves)
  • Weld leads

Specifications

Processes

Stick (SMAW)
TIG DC (GTAW-DC)
Plasma (PAC)
Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title Bobcat™ 200 Air Pak™ Diesel
Applications Aluminum Welding
Mobile Fabrication & MRO
Industries Farm and Ranch
Construction and Fabrication
Amperage 30 A - 210 A
Portability Lift Eye (Standard)
Running Gear / Cart (Optional)
Trailer (Optional)
Engine Brand Kubota
Engine Idle Speed 2400 RPM
Engine Weld Speed 2400 RPM,3600 RPM
Fuel Tank Size 7 gal.
Fuel Type Diesel
Horsepower 19 hp
Single Phase Auxiliary Continuous Power 6500 W
Single Phase Auxiliary Peak Power 8000 W
Sound Rating Idle: 67 dB / High speed with load: 72.8
Compressor Brand Rotorcomp
Compressor Free Air Delivery 30 cfm (0.85 m3 /min.)
Compressor Working Pressure 80 – 175 psig
Compressor Duty Cycle 100%
Compressor Automatic Shutdown High pressure (200 psi)
Battery Charge 12/24 V, 100 A
Crank Assist 12/24 V, 300 A
Compressed Air yes
Net Width 23 in
Net Height 30 in
Net Length 48 in
Net Weight 644 lbs
Warranty 3 Years
Miller's True Blue Warranty
Engine Warranties

Accessories

25-foot Battery Charge / Jump Start Cables with 2 Pole Connector Plug and Clamps

For the EnPak® A28, EnPak® A30, EnPak® A60, Bobcat®, Trailblazer® featuring Battery Charge / Crank Assist 2-Pole Connection
Remote Output Panel Kit for Engine-Driven Welders

With the Remote Output Panel Kit, you can locate your engine-driven welder's output panels at the point of use, so you don’t need to climb onto the truck as often — one more way to redefine where you work.
Air Dryer Kit for EnPak® A28 / EnPak® A30 / Bobcat™ 200 Air Pak™

Cools and removes moisture from the air supply. Designed for use above 32 degrees Fahrenheit (0° C). Bypass in colder temperatures.

Air Compressor Oil Heater for EnPak® / Bobcat™ and Trailblazer® Air Pak™ models

For use with EnPak A28, EnPak A30, Bobcat and Trailblazer Air Pak products in cold weather applications.

Resources

Literature

Bobcat 200 Air Pak Flyer
Bobcat Process Quick Start Quide
Work Truck Solutions Product Comparison Guide

Videos

Get Advice for Starting a Mobile Welding Business
Do you want to start a mobile welding business? Get advice from three field fabricators who’ve been there.
60 Sec Tech: Auto-Speed™ Technology
Noisy jobsites, high fuel costs: with Miller® Auto-Speed technology, these engine-driven welder issues are a thing of the...
Bobcat 200 Air Pak Diesel: Go All in With an All-In-One
Consolidate equipment and reduce fuel consumption on your work truck with the new all-in-one Bobcat™ 200 Air Pak Diesel...

Related Items

EnPak A30GBW Diesel Right
EnPak® A30GBW Diesel

For work truck fleet managers looking to keep idle time off of their class 3 to 5 trucks, EnPak A30 is the quietest and most fuel-efficient All-In-One that maintains PTO driven power capabilities, including 12V DC, in a compact, lightweight solution backed by industry leading reliability and performance expected from Miller.

Reviews & Ratings