Venture™ 150 S | MillerWelds

Venture™ 150 S with Battery and Charger Package

951000202
Battery Powered Welding Machine
Compare

Venture 150 S with Battery and Charger Package
951000202

Machine Only
907888

400Wh Battery Pack
301756

Charger
301755

Features

What's Included

  • Venture 150 S Power Source
  • 400 Wh Battery
  • Battery Charger
  • Shoulder Strap with Pad
  • 8 Rubber Bumpers/Feet
  • 10 ft. (3 m) work cable with clamp and 50mm Dinse-style connector
  • 10 ft. (3 m) stick electrode holder with 50 mm Dinse-style connector
Save Time
Faster setup and pack-up saves up to 250 hours annually — that’s more time for welding.
Compact Design
Light, convenient and easy to carry between job sites.
Engineered Specifically For Welding
Swappable battery packs so you can weld all day.
Reliable Output
100% duty cycle at maximum output
6010 Stick Electrode Capability
Superior Stick arc performance even on the difficult-to-run electrodes like E6010.
Hot Start™ Technology
Adaptive control provides positive arc starts without sticking.
Lift-Arc™
Provides arc starting that minimizes contamination of the electrode without the use of high frequency.
Created for Versatility
Batteries are lightweight and swappable, so users can weld anywhere
Fan-On-Demand™
Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through machine.
Thermal Overload Protection
Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.   Learn More
Low OCV Stick
A simple design that reduces the open-circuit voltage to 12-16 volts when the welding power source is not in use. Can be enabled or disabled. Some jobs require this.
Stick-Stuck
Detects if the electrode is stuck to the work piece and turns the welding output off to safely and easily remove the electrode.

Not Included

  • Personal safety equipment (helmet, gloves, etc.)
  • Stick Electrodes
  • TIG Torch for TIG Welding

Specifications

Product Literature

Processes

Stick (SMAW)
TIG DC (GTAW-DC)

General Specifications

Title Venture™ 150 S with Battery and Charger Package
Applications Field Welding
Mobile Fabrication & MRO
Off-Road
Process Pipe
Refineries and Power Plants
Stainless Steel
Tube and Pipe Fabrication
Industries Aerospace
Construction and Fabrication
Mining
Racing
Railcar
Shipbuilding
Transportation
Portability Handle(s)
Strap
Max Open-Circuit Voltage 80 VDC
Battery Charging Options Fast: 0-95% in < 30 mins.
Standard: 0-95% in < 60 mins.
Weldable Metals Stainless Steel
Steel
Current Type AC
DC
Weld Output CC
Amperage Range Stick: 20 - 150 A
TIG: 10 - 160 A
Material Thickness Steel 0.020 in. (0.5 mm) - 3/16 in. (4.8 mm)
Battery Lifespan Over 1,000 charge cycles under typical use cases and with proper care
TIG Arc Time Per Charge 15.54 minutes at 100A
8.33 minutes at 160A
Stick Electrode Consumption Per Charge 13.45 3/32 in. 7018 at 80A
14.49 3/32 in. 6010 at 60A
8.021 1/8 in. 7018 at 110A
8.14 1/8 in. 6010 at 90A
5.79 1/8 in. 7018 at 150A
5.57 5/32 in. 6010 at 120A
Input Voltage - Machine 57.6 VDC
Input Voltage - Charger 120 V
Input Hz 50/60 Hz
Input Phase 1-Phase

Resources

Videos