Toughcut™ acetylene outfit, CGA300 | MillerWelds

Toughcut™ acetylene outfit, CGA300

MB55A-300
Toughcut outfits include safety and reliable features found on other expensive medium duty outfits. The torch is nickel plated to deflect heat and resist rust. Cuts up to 6” thick steel, heat, gouge and weld with optional tips.

Features

What's Included

  • Torch handle (WH100)
  • Cutting Attachment (CC509P)
  • Oxygen Regulator (30-100-540)
  • Acetylene Regulator (30-15-300)
  • Cutting Tip (MC12-1)
  • Welding tip (MW205)
  • Heating Tip (MT603)
  • 20-ft 3/16" Twin Hose (RL935)
  • Friction Lighter (16571)
  • Safety Glasses (78000)
  • Regulator Mount Check Valves (H698)
  • Operations Manual
Silver-Brazed Connections
For extra protection, strength and leak resistance.
Nickel-Plated Finish
Deflects heat and resists corrosion.
Silver-Brazed Nickel-Plated Torch Joints
Provides strength, leak resistance and heat deflection.
Stainless Steel Ball-Style Valves
Allows for smooth adjustment and positive seating to eliminate leaks.
Slip-in Tip Design
No wrench is needed allowing for quick and easy tip changes.   Learn More
Three Tube Construction
Keeps gases separate in the cutting attachment until mixed at the tip for safety. Mixed gas stays farthest away from the operator.
Triple O-Ring Seal
For easy 360-degree torch head rotation to reduce operator fatigue.
Double-Tube Handle
Tube-within-a-tube design provides strength while reducing weight.
Internal Threads
Threads are protected from damage if torch is dropped.
Adjustable Valve Resistance
PTFE packing provides a gas-tight seal while allowing the "drag" to be adjusted to the individual preference.
Graf-Tite® Soft Seat Tip
Protects the tip seat from nicking for longer use.   Learn More
Center Pre-Heat Valve
Usage for both left and right-handed operators.
Dual Filters Including Sure Seat™
The regulator dual filter design protects the high-pressure seat from debris for reliable operation and long service life.
Nickel-Plated Bonnet with Forged Brass Body
Protects against corrosion.
External Relief Valve
Protects regulator from damage due to inadvertent high-pressure surge. Relief valve will release excessive pressure and automatically reset.
Neoprene Composite Diaphragm
Resists corrosion for extended service life.

Specifications

General Specifications

Title Toughcut™ acetylene outfit, CGA300
Industries Interests Construction and Fabrication
Warranty 3 Years
Miller's Gas Equipment and Gas Control Warranty

Accessories

Adjustable Circle Cutting Guide

Hard Hat™ Regulator Guard

Cylinder Wrench

Consumables

Smith® MC Series Medium-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 3/8 in. (10 mm) thick metal. For use with the following combination torches: MC505 + WH100, MC509 + WH100, CC509P + WH100.
Smith® MC Series Medium-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 3/16 in. (5 mm) thick metal. For use with the following combination torches: MC505 + WH100, MC509 + WH100, CC509P + WH100.
Smith® MC Series Medium-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 5/8 in. (16 mm) thick metal. For use with the following combination torches: MC505 + WH100, MC509 + WH100, CC509P + WH100.
Smith® MC Series Medium-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 1 in. (25 mm) thick metal. For use with the following combination torches: MC505 + WH100, MC509 + WH100, CC509P + WH100.

Resources

Videos

How To Choose a Hand-Held Oxy-Fuel Torch
Watch this video to learn how to select the right tip for your oxy-fuel cutting torch.
How To Choose an Oxy-Fuel Torch Cutting Tip
Watch this video to learn how to select the right tip for your oxy-fuel cutting torch.
Oxy-Fuel System Safety Checklist
Watch this video to learn the important safety steps you should take before, during and after using any oxy-fuel system.