Combination Torch Heavy Duty Outfit | MillerWelds

Heavy Duty Combination Torch Outfit with Acetylene Tips, CGA 300

HBA-30300
Complete oxy-fuel system that can handle high gas flow for faster cutting, heating, brazing and welding. The SC200 cutting attachment can cut up to 8-inch thick steel with the appropriate tip.
Compare

HBA-30300
HBA-30300

HBA-30510
HBA-30510

HBA-30510LP
HBA-30510LP

HBA-40300
HBA-40300

HBA-40510
HBA-40510

Features

What's Included

  • Torch Handle (WH200A)
  • Safety Glasses (78000)
  • Cutting Attachment (SC209)
  • Oxygen Regulator(30-100-540)
  • Acetylene Regulator (30-15-300)
  • Cutting Tip (SC12-1)
  • Welding Tip (SW205)
  • Heating Tip (ST602)
  • 25-ft 1/4" Twin Hose (RL1131)
  • Friction Lighter (16571)
  • Tip cleaner (16570)
  • Torch Mount Flashback Arrestors (H743)
  • Operations Manual
Double-Tube Handle
Tube-within-a-tube design provides strength while reducing weight.
Internal Threads
Threads are protected from damage if torch is dropped.
Adjustable Valve Resistance
PTFE packing provides a gas-tight seal while allowing the "drag" to be adjusted to the individual preference.
Replaceable Hose Connections
Connections are easily replaced if damaged reducing maintenance costs.
Flo-Trol™ Valve
Eliminates seat burn out due to reverse flow of mixed gases.
Center Pre-Heat Valve
Usage for both left and right-handed operators.
Dual Filters Including Sure Seat™
The regulator dual filter design protects the high-pressure seat from debris for reliable operation and long service life.
External Relief Valve
Protects regulator from damage due to inadvertent high-pressure surge. Relief valve will release excessive pressure and automatically reset.
Neoprene Composite Diaphragm
Resists corrosion for extended service life.
Graf-Tite® Soft Seat Tip
Protects the tip seat from nicking for longer use.   Learn More
SC12 Series Heavy Duty Cutting Tips
Preheat cutting tips for general hand and machine cutting with acetylene gas. This series provides excellent preheat characteristics required for machine cutting. SC12-1 can cut from 1/2 in. (13mm) to 5/8 in. (16mm) thick metal.
SW200 Series Heavy Duty Welding Tip
The SW200 series is for general and heavy welding and brazing with acetylene gas. Swaged construction provides greater heat concentration for improved “puddle” control. . SW205 can weld up to 1/8 in. (3mm) thick metal.
Silver-Brazed Connections
For extra protection, strength and leak resistance.
Nickel-Plated Finish
Deflects heat and resists corrosion.
Riveted Knobs
Will not come loose from the valve stem.
Silver-Brazed Nickel-Plated Torch Joints
Provides strength, leak resistance and heat deflection.
Stainless Steel Ball-Style Valves
Allows for smooth adjustment and positive seating to eliminate leaks.
Slip-in Tip Design
No wrench is needed allowing for quick and easy tip changes.   Learn More
Three Tube Construction
Keeps gases separate in the cutting attachment until mixed at the tip for safety. Mixed gas stays farthest away from the operator.
Triple O-Ring Seal
For easy 360-degree torch head rotation to reduce operator fatigue.
Nickel-Plated Bonnet with Forged Brass Body
Protects against corrosion.
2-Inch Regulator Gauges
The large regulator gauges are easy to read and are constructed from shatter-resistant polycarbonate lenses.

Specifications

General Specifications

Title Heavy Duty Combination Torch Outfit with Acetylene Tips, CGA 300
Industries Interests Construction and Fabrication
Warranty 1 Years
Miller's Gas Equipment and Gas Control Warranty

Accessories

Adjustable Circle Cutting Guide

Hard Hat™ Regulator Guard

Cylinder Wrench

Consumables

Twin Hose for Acetylene, 25 ft

Two-in-one hoses - "R" Grade hose for acetylene only and green for oxygen. Replacement hose with B hose fittings for torch series SC Heavy-Duty, MC Medium-Duty and Toughcut™. Hose diameter of 1/4" (6 mm).

Smith® SC Series Heavy-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 3/8 in. (10 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.
Smith® SC Series Heavy-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 3/16 in. (5 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.
Smith® SC Series Heavy-Duty Acetylene Cutting Tip

Longest lasting cutting tip for dependable performance. Cuts up to 5/8 in. (16 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Resources

Videos

How To Choose a Hand-Held Oxy-Fuel Torch
Watch this video to learn how to select the right tip for your oxy-fuel cutting torch.
How To Choose an Oxy-Fuel Torch Cutting Tip
Watch this video to learn how to select the right tip for your oxy-fuel cutting torch.
Oxy-Fuel System Safety Checklist
Watch this video to learn the important safety steps you should take before, during and after using any oxy-fuel system.

Related Items

Heavy Duty Acetylene Combination Torch Pack

This Heavy-Duty versatile kit comes with our classic SC cutting assembly with a heating tip, welding tip, cutting tip and torch-mount flashback arrestors, plus safety and operations manual. Torches can cut up to 5/8 inch (16 mm) with tips included.
Heavy Duty Acetylene Combination Torch Pack

This Heavy-Duty kit come with our classic SC cutting assembly with two cutting tips and torch-mount flashback arrestors. Torch can cut up to 5/8 inch (16 mm) with tips included.

Reviews & Ratings