Used for preheating with induction heating cables and quick wrap.
Protects the heating cable from slag and molten metal created during welding and abrasion. Cable cover does not provide insulation benefits.
Air-cooled cables are ideal for wrapping various pipe diameters, flat plate and irregular shapes requiring a flexible and uniform heating solution. Available in 30 ft, 50 ft, and 80 ft lengths.
Portable air-cooled induction heating system for preheat and bake-out applications up to 600 degrees Fahrenheit (315° C)
Used for preheating with induction heating cables and quick wrap.
Contact thermocouple sensor is placed on the part being heated and provides temperature feedback to the ArcReach Heater.
Air-cooled cables are ideal for wrapping various pipe diameters, flat plate and irregular shapes requiring a flexible and uniform heating solution. Available in 30 ft, 50 ft, 80 ft lengths.
Works on pipe with outside diameter of 10-1.5 inches and up to a 600° F (315°C). Most joints will require two quick wraps to be used simultaneously -- one on each side of the joint. Add preheat insulation based on temperature requirements.
Air-cooled cables are ideal for wrapping various pipe diameters, flat plate and irregular shapes requiring a flexible and uniform heating solution. Available in 30 ft, 50 ft, and 80 ft lengths.
Air-cooled cables or quick wraps connect to the side of the ArcReach Heater. Up to six thermocouple sensors connect to the yellow panel and provide temperature feedback from the piece that is being heated.
Used to connect two induction cables or blankets in series on one output
Protects the heating cable from slag and molten metal created during welding and abrasion. Cable cover does not provide insulation benefits.
Used for preheating with induction heating cables and quick wrap.
Protects the heating cable from slag and molten metal created during welding and abrasion. Cable cover does not provide insulation benefits.