octagon fire pit
Project Submitted: 2/1/2013
a 15 inch deep octagon shaped fire pit with 3 inch pipe legs. Top of pit is 30 inches and the bottom is 18 inches. Four inch wide flange 2 inches from the top. Pit is made with 1/4 inch plate and 1/4x4 inch flat bar and 3 inch pipe
Cut 8 side pannels the same size. Tacked them together. put on top of a piece of plate and marked bottom and cut and tacked bottom to side pannels and welded them together. Marked out the flange pieces tacked them to the side pannels 2 inches for the top and welded the up. cut 3 inch pipe on 15 degrees 4 inches long. Cut 5 inch circles and welded to pipe and then welded pipe to bottom of fire pit.Cut pieces of round stock and welded to make grill for logs to sit on.
Plasma cutter and home made circle cutter for plasma cutter, 4 and 7 inch grinders, framing square, bevel square, chop saw and millermatic 252 to do the welding
| Lawn and Garden
To activate your FREE subscription today, simply select which newsletter(s) you would like to receive and complete the form below.
Already signed up? Manage your subscription(s) by signing into your account. Or if you don't have a Miller account, create one today. Sign in / Create Account.
*Please select at least one e-Newsletter.
You can manage your subscription(s) by signing into your account. Or if you don't have a Miller account, create one today. Sign in / Create Account.