Work Trucks | MillerWelds

Work Trucks

Ready for anything, no matter where the job takes you

Ready for Anything

Work trucks are critical to your operation. A truck that’s down or not carrying the right equipment can’t get the job done. The full line of Miller® work truck solutions means there’s a reliable engine-driven machine that can reduce unplanned downtime and provide power to efficiently tackle the tough jobs you face, day after day.

Work Truck Knowledge Center

Learn How to Save Time and Money on Any Jobsite With a Welder/Generator

Save time and get work done faster on the jobsite with new technologies and Miller® welder/generator solutions.
Read More

Southwest Welding Extends Run Times, Cuts Fuel Use Reduces Noise and Saves Space with the New Trailblazer 325 EFI with Excel Power

Mobile fabricator relies on versatility and efficiency of new engine-driven welder generator for structural, pipe and heavy equipment repair work.
Read More

Engine-Driven Welder/Generators with Dual-Operator Capabilities Save Space and Fuel

A diesel engine-driven welder/generator with dual-operator capabilities is one tool that offers the versatility to help accomplish what you need to get done in today’s working environment — and provides you with the capability to do even more in the future — all while boosting efficiency and fuel savings.
Read More

Wisconsin Contractor Saves Fuel Costs and Employee Time with New Miller Engine-Driven Welder/Generator

InterCon Construction in Waunakee, Wis., has seen two decades of steady growth as an underground utility contractor for gas and electric companies. With nearly 450 employees, InterCon has personnel working at more than 100 jobsites during the peak construction months of April to December.
Read More

Electronic Fuel Injection Technology Improves Efficiency of Engine-Driven Welding Power Sources

Investing in an engine-driven welding power source with technology advancements can dramatically increase the return on investment, resulting in upgrades that pay for themselves in a short time.
Read More

How to Avoid Work Truck Downtime Caused by DPF Regeneration

Less frequent engine regeneration helps you reduce downtime and keep working — saving time and money on your work truck.
Read More

Versatile Work Truck Fleet Helps Freshour Precision Meet Customer Needs

A work truck needs the right tools to tackle any repair or emergency. For Freshour Precision, Miller welder/generators are key.
Read More

Cleaning Up Your Work Truck Can Impact the Bottom Line

There are many reasons that fleet managers and technicians should keep a work truck clean. Wear and tear, safety, and truck appearance can all impact a company’s bottom line.
Read More

An All-In-One Welder/Generator for Powering Jobsite Tools

To meet any jobsite demand, contractors and service truck operators need a welder/generator to power tools and save space.
Read More

Decrease Tier 4 Engine Idle Time to Reduce Costs and Downtime for Work Truck Fleets

Tier 4 engine regulations have resulted in significant changes for the work truck industry. As a result, some companies have seen increased downtime for engine regeneration, greater fuel costs and more time and money spent on maintenance. Tier 4 engines are not designed to idle constantly, so fleet managers want ways to reduce engine idle time to lower fuel costs, extend truck life and reduce serv...
Read More

North Dakota Company Reduces Service Truck Engine Idle Time with Work Truck Solution

For nearly six decades, Butler Machinery Company has offered equipment sales, service and product support for customers in a variety of industries, including construction, agriculture, demolition and scrap handling, mining, landscaping, power generation and on-highway trucking. With a fleet of approximately 175 service trucks manned by skilled field service technicians, Butler must be prepared...
Read More

Winterize Your Gas Engine Welder Generator

If you own a gas engine welder generator, getting it ready for the winter months also requires some attention and routine maintenance. The way you plan to use it over the winter will dictate the maintenance and preparations you'll need to undertake.
Read More

Trailblazer® 302 and Bobcat 250 Welding Generators Power Polyethylene Pipe Fusion Machine for M.T. Deason

Miller Electric Mfg. Co.'s Trailblazer® 302 and Bobcat 250 welding generators power polyethylene pipe fusion machine for utility products specialist M.T. Deason; provides enough power to run power tools and provides excellent Stick welding arc qualities for welding steel pipe.
Read More

Regular Maintenance Optimizes Performance of Work Truck Solutions

Maintenance is critical to keeping an EnPak work truck solution running optimally - to optimize performance and reduce unplanned downtime.
Read More

The Secret to Long Engine Life: Advice from the Experts on Maintaining Your Welder Generator's Gas Engine

Industry Experts Mike Trinkner (Miller Electric Mfg. Co.) and Jeff Gruell (Kohler Co.) discuss the best practices for extending the life of, and achieving optimal performance from, your engine-driven welder generator.
Read More

Preventive Maintenance Schedule Shortened for EnPak® A60 Work Truck Solutions

The recommended engine oil change interval was shortened from 400 to 200 hours for Miller® EnPak A60 work truck solutions.
Read More

New Speed-Governing Tech for Engine-Driven Welder-Generators Improves Fuel Efficiency and is Quieter

With most gasoline and diesel engine-driven welder/generators, idle and high speed are the only options when it comes to engine rpms. Unlike low-speed diesel machines, operating at a top run-speed of 1,800 rpm in higher amp-class machines, the welder/generators in this engine category will idle when there is no load applied to the engine and ramp up to a full speed of 3,600 rpm when any load is...
Read More

Take Idle off Your Truck With the EnPak A30 Power System

Reduce idle time on your truck by up to 75 percent and provide technicians with the power they need to get jobs done.

Bobcat 200 Air Pak Diesel: Go All in With an All-In-One

Consolidate equipment and reduce fuel consumption on your work truck with the new all-in-one Bobcat™ 200 Air Pak Diesel unit.

California Welding Operation Relies on ArcReach Technology

ArcReach® technology lets welders adjust parameters at the weld joint, reducing trips to the power source and enhancing safety.

Welding Technology Saves Time on the Jobsite

Miller® ArcReach® technology helps save significant time for M&M Welding, since welders can adjust parameters at the weld joint.

Reduce Jobsite Footprint with Convenient Miller Welder Generator Solutions

An all-in-one engine-driven welder/generator solution from Miller can deliver the tools and capabilities for whatever the jobsite demands.

Video 2 of 2: Trailblazer Sound Reduction Increases Safety, Productivity for InterCon Construction

A quieter jobsite is a safer, more efficient place to work. Miller built the Trailblazer® to run up to 68% quieter than previous models.

M&M Welding Saves Time and Money With ArcReach® Technology

M&M Welding relies on ArcReach technology to complete jobs all over California for customers that demand efficiency and high-quality critical welds.

Save Space on Work Trucks With Diesel All-In-One Solutions

Operators of class 3 to 5 service trucks can consolidate their power equipment with a fuel-efficient, all-in-one solution.

EnPak: fully integrated power system for work trucks with air, auxiliary power, hydraulic capability

EnPak is a fully integrated power system for work trucks -- including bucket trucks -- with air, auxiliary power and hydraulic capability.

Trailblazer 325 with Battery Charge/Jump Start Option

See the Trailblazer 325 EFI Battery Charge/Jump Start option – an add-on option Miller created to assist mechanics and fleet managers in the field.

Miller EnPak A28GBW is All-in-One Work Truck Solution that Stands Alone

Miller® EnPak® A28GBW is the industry-leading work truck power solution that provides more capabilities for service technicians while reducing expenses.

Company Decreases Fuel and Operation Costs with EnPak Power System for Work Trucks

To meet the wide variety of its customer needs, while also lowering fuel and operation costs, Butler Machinery decided to convert to EnPak® power systems.

EnPak A28GBW Delivers Battery Charge and Crank Assist Capabilities to Reduce Downtime

The EnPak A28GBW delivers up to 100 amps of DC power for 12V and 24V battery charging and up to 300 amps for crank assist.

ArcReach Technology Helps Ensure Optimal Weld Settings

Easily set optional weld settings for any job at the wire feeder or remote with ArcReach® technology.

Video 1 of 2: InterCon Construction Increases Fuel Efficiency, Productivity with Trailblazer 325 EFI

To gain fuel efficiency and get more power and flexibility, InterCon transitioned to Miller Trailblazer 325 welder/generators with Excel™ power and EFI for their field trucks.

How to Set Up Your Miller Big Blue or Trailblazer Machine

Get started with your Miller Big Blue or Trailblazer engine-driven welder/generator in no time with these instructions.

Miller Fusion 160 Portable Welder/Generator

Stay productive with the Miller® Fusion 160 welder/generator. Portable. Stable stick arc. Adaptable. The Fusion 160 is ready, willing and able to work for you.

Repairing a Vacuum Tank Discharge Pipe

M&M Welding relies on the Trailblazer® 325 welder/generator to complete many welding jobs for customers all over California.

Fuel Efficient Welding Equipment Keeps Noise Down

M&M Welding relies on Trailblazer 325 welder/generators with Auto-Speed™ technology to get the necessary power with less noise.

New Trailblazer Welder/Generators from Miller Reduce Sound Output up to 68%

This sound reduction helps improve communication and improves the overall sound quality on site.

Trailblazer 325 Diesel is Kicking Diesel and Changing the Game

The Trailblazer 325 Diesel welder/generator delivers multiprocess welding capabilities and smooth generator power, with innovative technologies.

Run Jobsite Tools at Quiet, Fuel-Saving Idle Speed

Excel™ power lets you save refueling time and operating costs while running jobsite tools off one welder/generator.

EnPak A28GBW Includes 210-Amp Stick Welder for field repairs

With a 210-amp stick welder, the EnPak® A28GBW can easily handle metal repairs in the field.

Electronic Fuel Injection (EFI) in Bobcat™ & Trailblazer Welder/Generators

Miller and Kohler reps discuss electronic fuel injection in engine-driven welder/generators such as the Bobcat 250 and the Trailblazer 302.

Trailblazer 302 Air Pak Meets Critical Air Compressor Needs for Team Elmer's

To help meet the many repair and service needs in the field, Team Elmer’s relies on the all-in-one Trailblazer 302 Air Pak engine-driven welder/generator.

Trailblazer 302 Air Pak Maximizes Productivity and Provides Space Savings for Team Elmer's

To help meet the many repair and service needs in the field, Team Elmer’s of Traverse City, Michigan, relies on the Trailblazer 302 Air Pak.

Miller Bobcat 200 Air Pak: All-In-One Payload-Saving Machine

The Bobcat™ 200 Air Pak™ delivers compressed air, generator power, battery charging/crank assist and stick welding capabilities — all in one payload-saving machine.

Miller Trailblazer Welder/Generator with Auto-Speed: More Productivity with Less Fuel and Less Noise

Miller-exclusive Auto-Speed technology helps extend runtimes.