Millermatic® 211 MIG Welder - MillerWelds

Millermatic 211

Welds 24-gauge to 3/8 in. material in a single pass. Uses 120V or 240V power.
  1. Compare
Dollar Sign Save up to $400 via Build with Blue mail-in rebate. Not valid on purchases. Learn More


What's Included

  • Millermatic 211
  • 6.5 ft (2 m) power cord and MVP™ adapter plugs for 120V and 240V
  • 10 ft (3 m) M-100 MIG gun and cable assembly
  • 10 ft (3 m) work cable and clamp
  • Argon and AR/CO2 mix regulator/flow gauge with hose
  • Spool of Hobart® .030 in (0.8 mm) solid wire
  • Two contact tips for .030 in (0.8 mm) wire
  • Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
  • Material thickness gauge #229895
  • Hook-and-loop cord wraps
Advanced Auto-Set™
Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.  Learn More
Inverter Technology
Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
Multi-voltage plug (MVP™)
Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
New Drive System
Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Quick Select™ Drive Roll
Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.
Auto Spool Gun Detect™
Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.
Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.

Not Included

  • Shielding gas
  • Safety equipment



Flux Cored (FCAW)

General Specifications

Title Millermatic 211
Industries Interests DIY / Home Hobbyist
Farm and Ranch
Metal Art / Sculptures
Auto / Cycle (Racing, Customizing, Restoring)
Current Type DC
Input Hz 60 Hz
Input Phase 1-Phase
Portability Handle(s)
Running Gear / Cart (Optional)
Net Height 12.5 in
Net Length 20.5 in
Input Voltage 110/115/120 V
220/230/240 V
Max Open Circuit Voltage 54 VDC
Net Weight 38 lbs
Weldable Metals Mild Steel
Stainless Steel
Net Width 11.25 in
Warranty Miller's True Blue Warranty
Amperage Range 30 A - 230 A
Material Thickness Mild Steel 24 ga - 0.375 in
Aluminum 18 ga - 0.375 in
Wire Feed Speed 60 IPM - 600 IPM
1.5 m/min - 15.2 m/min
Wire Diameter Solid Steel 0.024 in 0.035 in
Stainless 0.024 in 0.035 in
Flux Cored 0.03 in 0.045 in
Solid Steel 0.6 mm 0.9 mm
Stainless 0.6 mm 0.9 mm
Flux Cored 0.8 mm 1.2 mm
Rated Output 150 A at 21.5 VDC, 40% duty cycle (240V)
Spool Size 8 in (203 mm)




Reviews & Ratings

Rated 5 out of 5 by from Best Bang for your Buck! I did the change from a 115 volt competitor welder to a new redesigned 211, and i absolutely love it! I fabricate a lot of workout equipment from home, and most recently started doing simple mobile welding, not a business, but by word, and this "little welder" is more than enough to tackle any job, even at 120v. It paid itself within a month's time frame worth of hard work. I loved it so much that i'm definitely buying a 252 for the home shop.
Date published: 2015-11-16
Rated 3 out of 5 by from Great Unit, But I Prefer its Predecessor I owned the previous model. I absolutely LOVE the bead it lays, been a fantastic little machine. I was smash and grabbed a few months back and went to replace it, and this is what's on the shelf now. The monsterous handles are a bit of an eyesore in my opinion, and makes fitting a cover a more difficult task (have yet to find one). I appreciate the added function of a material selection dial. The footprint is also longer than the previous model, the custom stand I made doesn't quite fit this one. I definitely liked the taller model more. I also now have to change my 240v receptacle to accept this plug once again. And though it is remarkably lighter, it makes theft all the more enticing. I may be set in my ways and unaccepting to change, but I do prefer the older model. The 211 has never let me down, welds like a dream. I'm still a miller man for life. Hopefully Miller develops a cover for this machine soon, as I would like to protect my investment! Something that zips or Velcro's around the gigantic eyesore handles so you can pull it around without having to remove the cover (wink wink Miller).
Date published: 2015-10-03
Rated 5 out of 5 by from Solid welder. Great duty cycle. I was surprised at the duty cycle. I welded a filet weld at max power on 3/16 steel for about 7 feet before the overheat light came on and cut the welder off for safety. This welder can weld up to 3/8 which is all I would ever need. Unless you have a welding business and are constantly welding this is the right welder for you. For $900 after the rebate and a free welding helmet I don't think you will find a higher quality product our there for the price. Also there is a lot to be said about general portability of this unit. You can lift it with one arm . I own a tig syncrowave 210, 875 plasma, miller mig 252, and this unit. Miller hasn't let me down yet. Loyal customer here.
Date published: 2015-10-01
Rated 5 out of 5 by from Great product!!! My Millermatic 211 has been one of the best products I have ever bought. I use it everyday on my farm and would recommend this product to everyone!!! Thanks Miller!!!
Date published: 2015-08-19
  • 2015-11-28T06:44CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_907614, PRD, sort_mostRecent
  • clientName_MillerElectric