Trailblazer® 325 LP, GFCI | MillerWelds

Trailblazer® 325 LP, GFCI

907775
Trailblazer® welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive Auto-Speed™ technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance. No other compact machine in the 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less noise — for productive, profitable, quieter jobsites.
Compare

Base Model
907775

Excel Power ArcReach
907775001

Features

Unbeatable arc performance
Wide amperage output with better welding deposition rates means you can get jobs done faster, saving time and money. The Trailblazer also has precise arc control, which allows you to fine-tune the arc to match your personal preferences and quickly dial in the perfect parameters to optimize weld quality and maximize productivity across a variety of applications and welding processes.
Auto-Speed™ Technology
Matches engine speed to load — a Miller exclusive. Get the welding power you need — plus reduced fuel consumption and lower noise levels for a more-profitable, safer jobsite.Unlike competitive machines that operate at 3,600 rpm (max) under any load, Miller-exclusive Auto-Speed technology responds to weld requirements by automatically adjusting engine speed to one of four rpm levels so the engine never works harder than necessary.Refueling time and operating costs are reduced, which means more productivity and profitability. Plus everyone on the jobsite gets a better working environment because noise levels and exhaust emissions are lowered.
Electronic fuel injection (EFI) (option)
Improve fuel efficiency for maximum productivity and profitability. Adding EFI to your Trailblazer welder/generator adds multiple benefits. With EFI, you’ll get faster, more-reliable starts in any weather — no choke adjustments needed. EFI-equipped Trailblazer machines are also up to 42 percent more fuel efficient than standard carbureted models, improving profitability. Plus, refueling less frequently means you’ll spend more of your time welding, improving productivity.
Cleaner and Stronger Generator Power
Combined with a 25-horsepower engine, Trailblazer welder/generators offer up to 12,000 watts of clean, truly usable generator power that is Accu-Rated™, not inflated: tested to deliver uninterrupted peak output for a minimum of 30 seconds for big loads, so you can get more jobs done. An independent welder and generator power system ensures no interaction between jobsite tools and the welding arc, while advanced generator technology virtually eliminates power spikes and other electrical imperfections — so welds are cleaner and jobsite tools can run without interruption, maximizing quality, productivity and profit.
Fewer refueling trips
No other gas welder/generator in the 300-amp class lets your crews spend more time working and less time refueling — because only Trailblazer welder/generators provide Auto-Speed™ technology, plus Excel™ power and electronic fuel injection (EFI) options, to deliver maximum runtime.
Maximum cost savings
Less money spent on fuel means more profit for you. Every Miller Trailblazer welder/generator has fuel-saving Auto-Speed technology; add optional Excel power and Electronic Fuel Injection (EFI) to save even more on fuel costs and enjoy a combination of advanced, profit-enhancing features that are only available on a Trailblazer welder/generator.
Safer, more productive jobsites
Quieter jobsites are safer and more productive because work crews can communicate easier, and work can start earlier and end later — even in noise-sensitive areas. If your jobsite needs a welder/generator, it needs a Trailblazer welder/generator — because no other gas-fueled choice is as quiet.
More portable, uses less truck and jobsite space
Trailblazer welder/generators are up to 17 percent smaller and 10 percent lighter then competitive machines — which means moving them is faster and easier, for maximum productivity. And because they take up less space, Trailblazer welder/generators let work trucks carry more equipment and gear — so your work crews can be ready for anything.
Excel™ power (option)
Power at idle — a Miller exclusive. Unlike competitive machines that provide auxiliary power only at 3,600 rpm (max), Excel power delivers a full 2,400 watts (20 A) of 120-volt inverter-based, pure sine wave power at all speeds, including idle. With Excel power you can operate jobsite tools like grinders at quiet, fuel-saving speeds. Refueling time and operating costs are reduced with Excel power, which means more productivity and profitability. Plus everyone on the jobsite gets a better working environment because noise levels and exhaust emissions are lowered. Excel power — available only from Miller.

Not Included

  • Hose and LP Tank Mounting Assembly (300917)
  • Weld leads

Specifications

Processes

Air Carbon Arc Cutting and Gouging (CAC-A)
Flux Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
TIG DC (GTAW-DC)
Plasma (PAC)

General Specifications

Title Trailblazer® 325 LP, GFCI
Fuel Type LP
Portability Lift Eye (Standard)
Running Gear / Cart (Optional)
Trailer (Optional)
Net Width 20 in
Net Height 28 in
Net Length 40.5 in
Net Weight 476 lbs
Warranty 3 Years
Engine Warranties
Miller's True Blue Warranty

Accessories

300917 LP Tank Mounting Bracket
Bobcat™ / Trailblazer® Liquid LP Hose & LP Tank Mounting Assembly (LP only)

Designed for use with Running Gear, Protective Cage, or by itself. Includes bracket and clamp to mount 33- and 43-pound tanks horizontally, and hose with fittings to converter. Cannot be used with Gas Cylinder Mounting Assembly. Not recommended for use with Protective Cover.
ArcReach SuitCase 12 Q300 01
ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!
ArcReach SuitCase 8 Q300 01
ArcReach® SuitCase® 8 , Bernard™ BTB 300 A Gun Pkg

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!
ArcReach Smart Feeder PipeWorx Gun 01
ArcReach® Smart Feeder, Bernard™ PipeWorx 300 Amp Gun Pkg

ArcReach Smart Feeder system delivers excellent RMD® and Pulse MIG, MIG and Flux-Cored welding up to 200 feet away from the power source with no control cables. This system automatically shifts all controls to the Smart Feeder including weld process selection, material type and wire diameter, gas type, wire feed speed and voltage.

Resources

Videos

How to Set Up Your Miller Big Blue or Trailblazer Machine
Get started with your Miller Big Blue or Trailblazer engine-driven welder/generator in no time with these instructions.

Reviews & Ratings