Ability to wire for 120 or 240 VAC loads. For use with Bobcat™ / Trailblazer® / Big Blue® (except 400 and 500 CC).

For Bobcats, Trailblazers, and Big Blue products under 25 horsepower. A highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension. Includes jack stand, 2-inch (50 mm) ball hitch, fenders and lights.

Provides an area to conveniently wrap weld cables and extension cords.

Miller's 2-in-1 accessory conveniently holds a 5lb. fire extinguisher and stores important documents such as owner's manuals, and job site specific paperwork. Compatible with HWY-Mid Frame and HWY-225 trailers.

Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder. Cover fits Bobcat™ 230/265 Gas & LP Models and Trailblazer® 330 Gas Models (except Air Pak™) WITHOUT Protective Cage or Running Gear. To ensure proper fit, verify the tailpipe location on the engine-driven welder.

Take control and eliminate noise. Easily turn your Bobcat™ machine on and off remotely, so it only runs when you need it. For use with remote start/stop equipped Bobcat engine-driven welders. Fob can be easily paired with compatible machines.

Running gear allows easy movement around jobsite and rugged cage with cable holders protects your investment. For use with Bobcat 230/265 and Trailblazer 330 Gas and LP models.

Includes four heavy-duty 15-inch tires and a rugged handle to provide maximum maneuverability. For use with Bobcat 230/265 and Trailblazer 330 Gas and LP models.

Includes two heavy-duty 15-inch tires, two 8-inch rubber swivel casters and a heavy-duty handle. Recommended for all surfaces and applications and is easy to move around the jobsite. For use with Bobcat 230/265 and Trailblazer 330 Gas and LP models.

Rugged cage with cable holders protects your investment. Can be used with running gear, gas cylinder mounting assembly, or trailer. For use with Bobcat 230/265 and Trailblazer 330 Gas and LP models.

Designed for use with multi-terrain running gear, protective cage, or by itself. Includes base tray with bottle bracket, vertical support rack and safety chain. For use with Bobcat 265 and Trailblazer 330 Gas models. Not recommended for use with protective cover.

Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder. Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder. Cover fits Bobcat™ 230/265 Gas & LP Models and Trailblazer® 330 Gas Models (except Air Pak™) WITH Protective Cage or Running Gear. To ensure proper fit, verify the tailpipe location on the engine-driven welder.

Compact, 51 lb, 230/208V 1 PH unit provides plenty of power for 7/8 in. mild steel cutting.

Welds material from 24-gauge to 3/8 in thick in a single pass. Uses 120V or 240V power.

Easy-to-use and versatile MIG, Stick and DC TIG welder that helps build skills. Color screen featuring Auto-Set™ Elite. This all-in-one welder connects to 120 or 240 volt input power. Welds up to 3/8” mild steel.