Recommended for brazing copper pipe 1/2" - 1-5/8" (12.7 mm - 41.2 mm) in diameter. For oxygen and acetylene gases only. This rosebud tip can also be threaded on Adaptor AT40 for Versa-Torch™.
Provides lots of heat fast with economical propane gas and oxygen. Use with Hand Cutting Torches or Machine Torches only. Compatible with Heavy Duty SC Series cutting torches and Gas Axe™.
Versatility in tip end selection depending on flame desired. Recommended for use with Threaded Tip Tube AT60 for acetylene. This tip head has brazing capacity of 1/2" - 3/4" (12 mm - 19 mm) copper pipe diameter.
Recommended for brazing copper pipe 1/2" - 3/4" (12 mm - 19 mm) in diameter. This tip can also be threaded on Versa-Torch™ Adaptors depending on fuel gas - Adapter AT40 for acetylene and Adaptor AT41 for propane, natural gas or propylene.
General purpose tip best used for removing old welds or cracks, veeing and groove cutting. This 2-piece tip has gouging capacity of 3/8" (10 mm) wide and 1/4" (6 mm) deep. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
Recommended for brazing copper pipe 1/2" - 3/4" (12 mm - 19 mm) in diameter. This tip can also be threaded on Versa-Torch™ Adaptors depending on fuel gas - Adapter AT40 for acetylene and Adaptor AT41 for propane, natural gas or propylene.
Versatility in tip end selection depending on flame desired. Recommended for use with Threaded Tip Tube AT60 for acetylene. This tip head has brazing capacity of 5/8" - 1" (16 mm - 25 mm) copper pipe diameter.
Thread on the end of AT400 Flexible Twin Flame Tip for brazing, soldering and other soft flame applications. The tip head has a 63 drill size with brazing capacity of 3/4" - 1-3/8" (19 mm - 35 mm). Use with oxygen and acetylene. Recommended to use with Adapter AT40 for Versa-Torch™.
Delivers large volume of heat quickly for bending, straightening, shrinking, forming and other heating applications. Use with Hand Cutting Torches or Machine Torches only. Compatible with SC175 to SC365 and Gas Axe™.
Recommended for brazing copper pipe 5/8" - 1-3/8" (16 mm - 35 mm) in diameter. This tip can also be threaded on Versa-Torch™ Adaptors depending on fuel gas - Adaptor AT40 for acetylene and Adaptor AT41 for propane, natural gas or propylene.
Special purpose tip best used for cutting heads of bolts, rivets, risers and bulk heads. It can also be used in 180-degree head cutting torch to cut out boiler tubes. This 1-piece tip has cutting capacity of 1-1/2" ( 38 mm) rivets. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
General purpose tip best used for removing old welds or cracks, veeing and groove cutting. This 2-piece tip has gouging capacity of 6/16" (8 mm) wide and 1/8" (3 mm) deep. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
Versatility in tip end selection depending on flame desired. Recommended for use with the AT61 for alternate fuels. This tip head has brazing capacity of 7/8" - 1-5/8" (22 mm - 41 mm) copper pipe diameter.
Special purpose tip best used for edge preparation, removal of welds or gouging cracked metals. This 1-piece tip has gouging capacity of 3/8" (10 mm) wide and 1/4" (6 mm) deep. Compatible with cutting attachments AC309, MC500 Series and Toughcut™ CC509P.
Versatility in tip end selection depending on flame desired. Recommended for use with Threaded Tip Tube AT60 for acetylene.. This tip head has brazing capacity of 3/4" - 1-1/2" (19 mm - 38 mm) copper pipe diameter.
Best tip to use for hard to reach areas. This 1-piece tip is 9" (229 mm) in length and can cut up to 4" (102 mm) thick metal. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
Special purpose tip best used for edge preparation, removal of welds or gouging cracked metals. This 2-piece tip has gouging capacity of 1/4" (6 mm) wide and 3/8" (10 mm) deep. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
Special purpose tip best used for edge preparation, removal of welds or gouging cracked metals. This 2-piece tip has gouging capacity of 3/8" (10 mm) wide and 1/4" (6 mm) deep. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
Special purpose tip best used for edge preparation, removal of welds or gouging cracked metals. This 1-piece tip has gouging capacity of 3/8" (10 mm) wide and 1/4" (6 mm) deep. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.
Revolutionary patented "C" style tip provide 100% flame wrap for fast, efficient and even heating. Heat produced is confined to the joint area protecting surroundings from burning. Recommended for brazing pipes 1/2" - 7/8" (12 mm - 22 mm) in diameter. This tip can also be threaded on Adaptor AT40 for Versa-Torch™ acetylene only.
Special purpose tip best used for edge preparation, removal of welds or gouging cracked metals. This 1-piece tip has gouging capacity of 1/2" (13 mm) wide and 3/8" (10 mm) deep. Compatible with Heavy Duty SC200 Series Cutting Attachments, SC Series Cutting Torches and Gas Axe™.