Spectrum® 875 - MillerWelds

Spectrum 875 with Plasma Cutter with XT60 Torch with 20-ft. Cable

Cuts up to 7/8 in. mild steel. Available in hand torch configurations as well as CNC/Automation long and short body machine torch models.
  1. Compare


What's Included

  • Spectrum 875
  • XT60 hand-held torch with 20-ft. (6 m) cable. Includes a complete set of 60 A consumables.
  • Heavy-duty work clamp and flexible cable with quick connect
  • 10-ft. (3 m) power cord
  • Extra consumables
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.  Learn More
Automatic Air Regulation
For end user convenience, the unit has no pressure gauge or manual regulator knob. The unit automatically adjusts the air pressure to the torch for optimum cutting and gouging. No adjustments necessary.
Ultra-Quick Connect™ Torch
The fastest plasma torch and work cable connection and removal in the industry.  Learn More
CNC/Automation Cutting Capable
Factory ready CNC/Automation models are available in long or short body torches as well as retrofit kits to convert hand held machines to be capable of CNC/Automation cutting.
Wind Tunnel Technology™ and Fan-On-Demand™
Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components. Fan-On-Demand cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit  Learn More
Can Be Powered by Miller Engine Drive/Generator
Generator power at or above 10 kW (e.g. Bobcat™) or equivalent competitive equipment required.  Learn More
Ultra-Quick Connect™ Work Cable & Clamp
Work cable and clamp make for fast and easy setup and storage. The new ultra flexible Quick Connect work lead comes with a smaller heavy duty clamp.
Auto-Refire™ Technology
Provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.

Not Included

  • Air source (compressor or bottled gas)
  • Personal safety products (safety glasses, gloves)



Plasma (PAC)
Plasma (PAC)

General Specifications

Title Spectrum 875 with Plasma Cutter with XT60 Torch with 20-ft. Cable
Industries Interests Auto / Cycle (Racing, Customizing, Restoring)
DIY / Home Hobbyist
Heavy Equipment Manufacturing
Boat / Yacht
High Purity Processing
Capability Gouging
Input Hz 50 / 60 Hz
Input Phase 1-Phase
Plasma Material Thickness Mild Steel 7/8 in. (22.2 mm) 15 IPM
Stainless Steel 7/8 in. (22.2 mm) 15 IPM
Aluminum 5/8 in. (15.9 mm) 15 IPM
Rated Output at 104 Degrees Fahrenheit 208 V: 60 A at 140 VDC, 40% duty cycle; 230 VDC: 60 A at 140 VDC, 50% duty cycle
Net Height 13.5 in
Net Length 18.75 in
Input Voltage 208 V
220/230/240 V
Net Weight 51 lbs
Recommended Generator Power 11000
Net Width 8.75 in
Warranty Miller's True Blue Warranty

Reviews & Ratings

Rated 4 out of 5 by from the little machine that could I've had this plasma cutter now for a little more than a month and before I even plugged it in, right out of the box I put three coats of wax on it. Call me crazy but all of my machines are well cared for and my customers notice it. Anyway, back to the spectrum 875: I was extremely skeptical that this tiny 50lb unit, filled with circuit boards and a couple capacitors would cut anything heavier than some flashing. I was surprised when it sliced right through some 1" mild steel plate! I'm not sure what my travel speed was but I surely wasn't taking my time! I like how the torch hose and ground lead are detachable. The power cord should have been designed that way. I also like that the fan doesn't run all the time, just while you're cutting. It did come with a few consumables but not the tip needed for gouging. What's up with that? Would have been nice if Miller included a hose cover but they didn't so that's another trip to the welding supply store. When cutting, the drag shield blocks your view and I'm not impressed with the dainty feel of the trigger nor the safety lever that's built into it. Overall I'm satisfied with the purchase and would recommend it to anyone looking to get a plasma cutter.
Date published: 2015-02-05
Rated 5 out of 5 by from Spectrum 875 Plasma Cutter is Outstanding!! Was looking to buy a plasma cutter for some time and finally decided on the Spectrum 875. This unit is probably larger than I'll ever need but when that one job comes along, I'll have the tool to get it done. This machine works very nice and easy to use. It makes short work on cutting any metal I've come across. When using a guide (Strait edge, etc...# this unit cuts very clean with little to no slag at all. When you get the hang of the speed of travel along with the right amount of power the cut is very, very clean. I now use the plasma cutter more than my metal band saw #both horizontal and vertical). Wish I would have purchased one years ago. Thanks for an outstanding piece of equipment. John
Date published: 2013-05-04
Rated 5 out of 5 by from this product is very economical to own. This plasma cutter does a great job of cutting all types of metals.This product saved me a lot of money that I didn't need to buy as many tanks of gas and oxygen for my torch. I esspeically like the long leads so I don't need to keep moving the machine if I'm cutting a large project. I owned my machine since febuary 2012 and it gets used quite a bit in my farm shop..
Date published: 2013-05-04
Date published: 2013-05-01
Rated 5 out of 5 by from Spectrum 875 plasma cutter Very powerful plasma cutter. Should of bought it sooner.
Date published: 2013-04-30
Rated 5 out of 5 by from It works perfect. it is great for cutting i wish i would have bought it 2 years sooner.
Date published: 2013-04-30
Rated 5 out of 5 by from Simple to set up and use. This machine has awesome power for the size of the machine. Controls are easy to use and cutting is fast and easy. I have pushed the machine to its severance cut yet, but I am very impressed with what I have had opportunity to sue it for. I would definetely reccommend this product.
Date published: 2013-04-30
Rated 5 out of 5 by from Great Plasma Cutter But Needs A Cover Great Plasma Cutter! Would highly recommend but disappointed in Miller for providing a box or cover for other models but requiring you to buy it for the 875. I would think they could throw in some sort of soft cover when you spend $2000+ on a plasma cutter. I have the 50' torch and haven't had any issues. It cuts great and is super strong. Satisfied with my purchase.
Date published: 2013-04-30
  • 2015-11-26T06:33CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_907583, PRD, sort_mostRecent
  • clientName_MillerElectric