I am not sure if this forum is linked to the "Ask Andy" forum, if it is, I appologize for double posting. I posted there before I found this forum.
I have been lurking around the "Ask Andy" forum for quite some time. I have enjoyed everyones post and have learned quite a bit. I am a longtime Miller fan. All the machines I have bought have always been Miller. I started out with a Miller "cricket" 110v mig. I had that machine for about 15yrs without any issues. My next machines were a Millermatic 210 and a syncrowave 180. I also have a Spectrum 300 plasma.
The only issue I have ever had was with the plasma. I made a simple email to Millers tech support and I must say their support was amazing! Scott H was extremely helpful. He went above and beyond my expectations. I am definately glad I have been a loyal Miller customer. Someday I will have to take a feild trip down there from Canada just to shake that guys hand, and of course see the facilities!
He figured you guys might enjoy some of my projects, so here are some pictures.
Results 1 to 10 of 21
12-29-2005, 11:35 PM #1Junior Member
- Join Date
- Dec 2005
Long time lurker introduction <pics>