Darmik thats a nice looking setup and looks very safe. The trouble I see with Triggermans setup is the inclosed van. The driver is in the same compartment as the cylinders. If by chance there was a leak in a gas or co2 cylinder the driver could black out while driving down the road causing a accident or even death to himself or someone else. I think it would be a great setup if the driver was isolated from the cylinders. Maybe I'am thinking to negative here.
Results 11 to 15 of 15
02-13-2007, 11:36 AM #11Junior Member
- Join Date
- Feb 2007
02-13-2007, 07:24 PM #12
OOPs that was 12,700.00 for the body
Last edited by Darmik; 02-14-2007 at 06:59 AM.
02-14-2007, 12:29 PM #13Senior Member
- Join Date
- Feb 2007
- West Farmington, OH
My welding supplier wouldn't even let the tanks off the loading dock knowing they were going to be transported in a closed vehicle. There are many horror pictures of people carrying tanks in enclosed vehicles, some you can't even identify what it was before it blew up. My welding supplier refused to allow me to take my tanks away until I took the cap off my pickup truck (even though I had the side windows open and didn't close the back window), I realize that some suppliers are more strict than others but common sense goes a long way, one should never mix a flamable gas with an oxidizer in an enclosed container whether it has wheels or not. As far as the Argon bottle if it had a defective valve on it and leaked enough it could even suffocate you as Argon is heavier than air and would settle to the bottom of your lungs and fill them up preventing you from getting any oxygen.
The idea and design however is a great idea and would be an excellent way to transport your cylinders in a pickup truck.
I don't mean to sound negative but I'd hate to see anyone get hurt because of unsafe handling of cylinders.
02-15-2007, 06:50 PM #14
Triggerman, it looks like your just gonna have to drive with the window open all the time. It never gets hot or cold in Dallas, Does It? Anyway, it is a great design, I like the 'Nylon'? spacers between the screw. Nice to see someone standing their acetelyne bottle upright instead of laying them down like the morons I used to work with......Jealous in Florida, Paul
02-15-2007, 10:04 PM #15
As a matter of fact......
Oh, well. I was working in a -20° freezer today (we do systems that operate as low as -100° and provide the primary loop for some systems that maintain -450°) and the engine rooms we work in run 20-25° hotter than ambient, so cracking a window is no big deal.
The spacers between the threaded rod and the bottle are pieces of the same schedule 40 pipe the rings of the base are from.
Thanks for the kudos,Triggerman
Ammonia refrigeration tech
Trailblazer 302 (yes, it's new)
Millermatic 180 w/Autoset
HF-15 High frequency
XR15 w/Push-Pull Gun
Victor O/A, DeWalt, North mask
"A professional knows what to do. A craftsman knows why."