Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Nov 2006
    Location
    mn
    Posts
    4

    Default mm210 and Spool gun it is! GOOD Choice??

    I made a choice I beleive Im going with a mm 210 and spool gun set up. Does this seam wise I do a lot of body work and very little work over 3/8 inch and now I will be able to get into some aluminum. Any feed back from owners using this set up would be appreciated! Can the 210 do 3/8 all day if needed? Is this aluminum set up pretty Good? With no good looks at a 210 do you know is there actually extra gas hook ups in the rear or do I have to re hook all the time. Thanks guys!!

  2. #2
    Join Date
    Jan 2006
    Location
    Albuquerque, NM
    Posts
    1,788

    Default

    That setup can do a good job on 3/8" aluminum, there is a hookup for both C25/CO2 and Argon tanks, it is plug and play you just need to turn on the gas you want and pull whichever trigger you want to use. The only drawback is that you won't be able to do any aluminum much under 14ga. The MM210 will also do a nice job on 22 ga MS sheetmetal using C25 gas.
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter

  3. #3
    Join Date
    Sep 2005
    Location
    Salem ,Ohio
    Posts
    3,902

    Cool

    To do 3/8" all day is a long time to keep the trigger down, somethings gonna melt. Now to do 3/8" on and off over a few hours , yes with a little break for you and your machine. Always remember to give the machines a little rest and cool down...Bob
    Bob Wright, Grandson of Tee Nee Boat Trailer Founder
    Metal Master Fab Salem, Oh 44460
    Birthplace of the Silver & Deming Drill
    1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  4. #4
    Join Date
    Jan 2006
    Location
    Albuquerque, NM
    Posts
    1,788

    Default

    Quote Originally Posted by aametalmaster View Post
    To do 3/8" all day is a long time to keep the trigger down, somethings gonna melt. Now to do 3/8" on and off over a few hours , yes with a little break for you and your machine. Always remember to give the machines a little rest and cool down...Bob
    Yep, Bob's right the 210/3035 combo, it is not a production machine where parts are given to you ready to weld and you just do that all day, but for a small shop where you have to cut, clean, measure, fabricate before welding ... and you plan the welding work out, the 210/3035 can work quite nicely, IMO. Just watch the duty cycle is all ...
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.