Ring Roller

[P.the Heat]

Hi everyone, I'am a new member and new to this forum.
I need some help, I want to build custom gates and need to build a machine
that can arch or roll 2'' square tubing.
Does anyone have an idea on how to build one?
P.S. I'd sure would appreciate if somebody has an idea on how to
build one.
Please send plans

[Frank865]

Check this out...
cgi.ebay.com/Sheet-Metal-Pedestal-Band-Ring-Roller_W0QQitemZ270052132504QQihZ017QQcategoryZ421 47QQrdZ1QQcmdZViewItem
Several other members, & myself from the Motorsports board bought one like this.
You can buy one of these cheaper than you can buy the parts to make your own. If it doesn't do what you need, then you can modify it to suit your needs.
There are several threads about ring rollers, & the modifications done to them for specific purposes. You may want to go over there & do a search...

http://www.millermotorsports.com/mbo...isplay.php?f=3

HTH

[fun4now]

i have that roller but it wil not do 2" unless you change out the rollers. also if using tubing it can distort the tube a bit depending on how bent you want it.
i also have the bender and have used some of the rollers from it in the ring roller, not a perfect fit but you can get buy.

[JHCHOPPERS]

We have one and have posted plans on how to build it. You can see it on our website http://www.jhchoppers.com, just click on TOOLS in the navagation window.

The information can from Jason on the "Hobart Weld Talk"

[fun4now]

wow thats a nice looking roll, i'm going to have to download the plans and get that babby made this summer. looks verry usefull.
thanks for the info.
oh and nice bikes.

[JHCHOPPERS]

cool: oh and nice bikes.

Thanks....

[jfsmith]

JHChoppers,

I can't get the autocad drawing to come up, it wants me to update a program, which I did and it still won't come up.

Any help would be appreciated,

Thanks,

Jerry

[P.the Heat]

Thanks to everyone,
Your info was very helpful, that is what I wanted to see
To get an idea on how to build one
Now what i need to do is just get the parts and get started.

JH choppers
Very nice bikes

[vtwin4life]

Those rollers look real nice... Now if I could just convince my wife that I *need* one. Just finished convincing her I *needed* the plasma cutter - this might just set her over the edge ;-)

[JHCHOPPERS]

JHChoppers,

I can't get the autocad drawing to come up, it wants me to update a program, which I did and it still won't come up.

Any help would be appreciated,

Thanks,

Jerry

Try right clicking on the icon and select 'Save Target As' from the popup menu.