Ring Roller

[jfsmith]

I did all of that, now I have the filoe, but Acad 2000 Says it's an incompatable file format or something like that.

Jerry

[jfsmith]

I have the file and can view it with one of the Brava readers, thanks.

Jerry

[fun4now]

Those rollers look real nice... Now if I could just convince my wife that I *need* one. Just finished convincing her I *needed* the plasma cutter - this might just set her over the edge ;-)

best way to do that is find something you can make for her that needs a roller for.

[JHCHOPPERS]

Update: We have moved the location of the ring roller project, been rolling out a major update to our website and the old location is no longer valid.

http://www.jhchoppers.com/tools/

Thanks,
JH

[Nickos]

i need a roller that will roll 1 inch square tubing in 7ft diameter circles

any ideas?

[ed_h]

Nickos--

Here is a roller I made a couple of years ago. It's a little different design than the one from JH, but it worked well for my purposes:

http://bullfire.net/Roll_Bender/WP_Roll_Bender.html

[Nickos]

Nickos--

Here is a roller I made a couple of years ago. It's a little different design than the one from JH, but it worked well for my purposes:

http://bullfire.net/Roll_Bender/WP_Roll_Bender.html

looks like several others that ive been looking at.. i guess thats the way to do it then

thanks for the photos!

[Nickos]

Nickos--

Here is a roller I made a couple of years ago. It's a little different design than the one from JH, but it worked well for my purposes:

http://bullfire.net/Roll_Bender/WP_Roll_Bender.html

do you have plans or BOM?

[ed_h]

no, sorry I don't. It was a disign as-you-go project.