And what would the guy that has no access to plasma cutting do, sorry cant weld that today we have no plasma???
Results 11 to 16 of 16
04-06-2009, 10:40 AM #11
04-06-2009, 10:51 AM #12
6010 + 7018 how about when it is not an open root?
I know you were wanting to help and parts of your post are true for specific joints and conditions.
To the OP.
First you need to determine "what needs to be welded"?
Then establish a procedure.
Then test the procedure/ or the welder to the pre-qualified procedure.
In the USA system no one(AWS) certifies welders. welders are qualified.
Qualifications are limited to qualified procedures and have an sunset (don't weld to the procedure for 6 months and the qualification expires [AWS D1.1])
In some ways I suspect you know all this and are here playing with the animals, just fishing for all the misinformation that abounds?
04-06-2009, 10:54 AM #13Member
- Join Date
- Jan 2008
I'm wondering if after almost 30 months dontommy900 is needing this info?
Feel free to continue..."Religion is regarded by the common people as true, by the wise as false, and by the rulers as useful."
-- Seneca the Younger
04-06-2009, 11:00 AM #14
This sounds like you are talking about AISC not AWS. AISC deals with steel fabrication standards and practices. AWS deals with welding and welding related issues, standards and practices.
AWS requires each individual to be qualified. AWS has no provision to qualify groups as a whole.
It would be helpful if you posted the material you are referring to, in this post.
04-06-2009, 11:05 AM #15
04-06-2009, 04:00 PM #16
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.