Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 5 of 5

Thread: Trailer Trash

  1. #1
    Join Date
    Apr 2007
    Location
    Colorado
    Posts
    35

    Default Trailer Trash

    I seek wisdom - I am in short supply.

    I realize that 'house trailers' come in a variety of qualities - from trailer trash to fine homes on wheels. (When I say 'trailer trash' I am speaking of the structure, not its inhabitants.) My question is the axles that they roll in on.

    I have access to 100 or more axles - some 8 feet long and some 12 feet long. They all seem to be 3" sch 40 size pipe. Most of them do have a bit of a wow or camber in them, I assume to flex as the trailer travels.

    Here's my question. I want to add gin poles to my truck. If I cut off the spindles the pipes would be the correct length. I realize that a length of 3" pipe, new, would only be about $100 but free is hard to pass up. What quality is the steel in the axles? Is there any reason that the 'axle gin poles' would not work. My winch is only 8500 pounds so that would be my limiting factor.

    I could not find a single tag on any of the axles - so I can't call the manufacturer.

    Thanks!

  2. #2
    Join Date
    Sep 2005
    Location
    Salem ,Ohio
    Posts
    3,899

    Cool

    The axles are just mild steel pipe. Don't trash the spindles or backing plates i know a few people looking for them...Bob
    Bob Wright, Grandson of Tee Nee Boat Trailer Founder
    Metal Master Fab Salem, Oh 44460
    Birthplace of the Silver & Deming Drill
    1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  3. #3
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,697

    Default

    The axles are mild steel pipe and they come pre cambered so that the weight of the trailer bends them to zero so to get even wear on the tires.

    That doesnt mean theyre perfectly cambered but its better than not doing anything.

  4. #4
    Join Date
    Feb 2009
    Location
    Island Falls Maine
    Posts
    562

    Default

    I have cut them to shorten them up befor and you cut them in the very center and take the same amount out on both sides and then weld it back to gather.

  5. #5
    Join Date
    Nov 2008
    Location
    Richmond, Ky
    Posts
    13

    Default

    If you have a hundred of those axles you would be better off selling them to a whole seller, then buying new pipe. They may not all be worth a lot but if the shortest is eight feet they will buy them for cash. Feel free to pm me Im still in the mobile home buisness and have sold them for years.
    2 -225 bobcats 1 Koehler 1 Onan
    Kalamazoo band saw
    Dewalt dry cut carbide tooth chop saw
    Hitachi grinders and drills
    Miller 210 mig
    IR air compressor Koehler engine
    Hypertherm Plasma cutter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.