I have used carbon rods to fill worn out hitch pin holes. Put the carbon rod in the hole and weld around till the hole is full to your standards and pull the rod out and you have a perfectly round hole you dont have to try and drill
Results 651 to 660 of 664
Thread: You might be a weldor if....
-
11-30-2012, 06:43 PM #651
Junior Member
- Join Date
- Sep 2012
- Posts
- 7
carbon rods
-
12-09-2012, 12:28 AM #652
Member
- Join Date
- Oct 2012
- Location
- Neosho mp
- Posts
- 32
If you can identify the rod type by the smell of the flux smoke
-
12-18-2012, 10:54 AM #653
Member
- Join Date
- Dec 2012
- Location
- Simcoe Ontario
- Posts
- 47
You might be a weldor if....
YMBAW if you think tungsten is an acceptable toothpick
When others say they are a welder you roll your eyes and wonder if they can actually weld
You buy a cheap Lincoln so you can make enough to buy the dream miller
You always carry at least one flashlight at all times
You think 308L tig wire makes nice jewelry
You got a tig torch tattooed on your hand
You discover nomex/ Kevlar laces and buy the whole box cuz they might last a little longer
Your sunglasses are cutting glasses
You think every boiler tube should have been welded by you
-
12-18-2012, 10:58 AM #654
Member
- Join Date
- Dec 2012
- Location
- Simcoe Ontario
- Posts
- 47
Rather than set up your torch you use 6010 to cut almost everything
-
01-08-2013, 01:41 PM #655
Member
- Join Date
- Feb 2010
- Posts
- 30
3 years and going strong!
in the same sentence where to find a church or some crack cocaine ...... Lol true story .
^^
That was funny stuff.
THe one about the asking the fire watch if somethings on fire and its you!
YMBAWI you have a whole cabinet of consumables from different jobs. (That ones are little secret though...)
-- you can read a whole sign of words on a window while standing behind it!
-- you find this thread after 3 years and reread most of it again. This is great!
-
02-01-2013, 08:22 PM #656
Member
- Join Date
- Feb 2012
- Posts
- 43
Only got to page 32, but gotta add mine........
YMBAWI: your company installs a new time clock that is fingerprint operated, and you have to use a pin pad instead because it won't read your prints
YMBAWI: your changing your 1 yo daughters diaper and you wonder if her diaper rash cream will soothe the flash burn on your arm (between the bottom of your shirt sleeve and top of glove, inside left arm)
YMBAWI: the door bell rings at 3:22am, because your buddies were rock crawlin and broke the jeep again and need you to weld it back together so they can get to work in the morning, or you have to put the TB275 and some 6011 in the truck to go fix the jeep broke on the rock/in the mud
YMBAWI: your wife buys a beautiful brand new pair of red wing boots, but you have her take them back because they have laces, (and we all know laces get expensive)
All true!
P.S. so many of the posts are true lol.Last edited by aaronobrien; 02-01-2013 at 08:35 PM.
-
02-18-2013, 11:25 PM #657
Junior Member
- Join Date
- Jan 2013
- Location
- Ohio
- Posts
- 14
Ymbawi your in jail and all you can do is look at the welds and think they all coulda been done better or what you can use to break out overlooking the concrete.
-
02-19-2013, 09:09 AM #658
Senior Member
- Join Date
- May 2011
- Location
- Bossier Parish La.
- Posts
- 385
-
03-14-2013, 01:03 AM #659
Junior Member
- Join Date
- Mar 2013
- Posts
- 1
You might be a welder if your daughter hugs you and tells you that you smell like metal.
-
03-15-2013, 03:46 PM #660
Junior Member
- Join Date
- Dec 2012
- Posts
- 5
You might be a weldor if....
You clean stainless with acetone wearing your welding gloves and go to tack your parts together and spontaneously start your whole hand on fire... Not once but three times.


Reply With Quote








