Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    4

    Default MM 211 Voltage Conversion?

    Has anyone done the conversion on a millermatic 211 to see what the voltage is at each setting? For example the voltage knob goes from 1-10, but I would like to know what I am actually welding at. Like is a 10 24volts and a 1 14volts?

  2. #2
    Join Date
    Feb 2012
    Location
    Wa
    Posts
    531

    Default

    Search. This topic has been beaten to death. Lots of threads with the info your looking for. Not necessarily a direct answer but it will piece it together.

  3. #3
    Join Date
    Oct 2004
    Location
    Edmonton, Alberta
    Posts
    7,470

    Default

    Get yourself a DC volt meter....

  4. #4
    Join Date
    Jan 2014
    Location
    Northern West Virginia
    Posts
    36

    Default Look at the Owner's Manuel

    I believe there is a graph in the owner's Manuel for the 211 that charts the machine's voltage output at both 120 and 230 volts input. I'm not positive on this but I think the voltage is also partially effected by the wire feed rate too, and of course the numbers for the wire feed rate control are completely arbitrary too.

  5. #5
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    4

    Default

    Quote Originally Posted by Cgotto6 View Post
    Search. This topic has been beaten to death. Lots of threads with the info your looking for. Not necessarily a direct answer but it will piece it together.
    I will have to keep looking then, I could not find a post after about an hour or so of searching. Thanks anyway.

  6. #6
    Join Date
    Dec 2007
    Location
    Los Angeles
    Posts
    2,831

    Default

    Ed Conley
    http://www.screamingbroccoli.net/
    MM252
    MM211
    Passport Plus w/Spool Gun
    TA185
    Miller 125c Plasma 120v
    O/A set
    SO 2020 Bender
    You can call me Bacchus

  7. #7
    Join Date
    Feb 2012
    Location
    Wa
    Posts
    531

    Default

    You are not finding it because all of the threads that start the inquiry end up at a dead end when they realize it's not very simple, and above it all, it makes zero difference if you know what the "actual voltage" is rather than "6". In the end if it's set up correctly the welder will run perfect. Makes no difference to know the voltage and wfs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137