Hello I am new to tig and have been learning the process. I outgrew my 180sd and bought an everlast 255 ext to advance my aluminum skills and it works great but it is so freaking noisy. The constant fan and 6 million db water cooler makes the process annoying. So now I found a brand new never used 300dx tigrunner package for $4,300. Still has the red plugs in all the ports and all connectors are still in the unopened plastic miller bags. So compulsively I bought it and was curious will the 300 preform like the Everlast with all the waveforms etc. or will it be a little behind because the 300dx is older technology pre Blue lightning(not really sure what that means?). My 300dx is the latest version of the 3 produced and does not have the Waveforms-Sine triangle. My preference would have been the 280dx but I would be $3k more for a comparable miller setup. What are your opinions and I have not received the machine yet totally psyched to fire it up. Maybe I paid to much, too late now?? What are your thoughts?
Results 1 to 2 of 2
Thread: 300dx compulsive decision??
04-27-2014, 08:59 PM #1Junior Member
- Join Date
- Mar 2014
300dx compulsive decision
Last edited by patktm; 04-28-2014 at 03:50 PM. Reason: duplicat
04-30-2014, 02:18 AM #2
If the deal is legit it should work fine
Hope it works out. Those were good welders at the time.
It's the no warranty thing that is scary. If it blows a board or something it is worth very little money.
If it works out, then only you can determine if it was worth it.
You never said what you are gonna use it for, we are kinda reaching here IMO.
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400