Well here is the update on what is going on with this fine machine......
I talked to Miller factory and after a few calls and telling them what I thought, so they did some testing, they sent me a new front board for this machine, I guess they must have thought that my board was bad?
I'm guessing they was right........
I changed it out and gave it a small try, so far it's 100 times better so far.......
Going to try and get about 5-6 hours on it over the weekend and see if it is all better
If this machine is up to my high standard then all my faith will be back in Miller's high standard of products.
Results 21 to 21 of 21
05-17-2014, 12:23 PM #21
Update on 3252007 Trailblazer 302G
2004 Invision 354MP
1999 60 series feeder
2005 Maxstar 200DX
1999 HF 251-1
older Hobart hefty wire feeder
Maxstar 150S(such a cute welder)
had and sold........
2003 XMT 304CC/CV
1947 Lincoln SA200G short hood
1963 Lincoln SA200G
1975 Lincoln SA200G(best machine ever had )
1970's Lincoln SAE400G
2 Maxstar's 200DX's
1 Maxstar 200SD
2 CST 250