Hi All,
I have an xmt350 with a 22A wire feeder, neither of which I have used for a year or so. Trying to get the mig working again and the wire feeder is kind of jamming. Not a steady feed. starts, stops, starts, etc.
Being a bit of a rookie I'm not sure what else to look for. I released the roller tension and pulled the wire by hand. It was pretty hard to pull through but I was able.
Can anyone give me a little troubleshooting guidance?
By the way the xmt 350 does have a pulse mig setting and that is not the issue. I have it set to mig.