Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
Miller Welding Discussion Forums - Powered by vBulletin

Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30
  1. #21
    Join Date
    Dec 2007
    Los Angeles


    AK- you never mentioned if you actually switched the wires INSIDE the machie

    Remove the sleeving from both leads.
    6. Connect the large lead to push-on terminal
    labeled “3” on the adjacent PC board.

    7. Connect the small lead to terminal 15 of the line

    8. Reposition insulation to cover line switch.
    9. Re-install wraparound.
    10. Move the lock pin to allow switch movement for 230 V selection only.
    Ed Conley
    Passport Plus w/Spool Gun
    Miller 125c Plasma 120v
    O/A set
    SO 2020 Bender
    You can call me Bacchus

  2. #22


    Sorry for no update.

    Thanks for the tip Ed.

    I'll check.


    You'll be the second to know.

    Life is to short for cheap tools.

  3. #23


    Life is to short for cheap tools.

  4. #24


    Life is to short for cheap tools.

  5. #25


    Sorry, double post, but.... I hope you'll forgive me.


    I had so forgotten about the relinking.
    So used to auto links.

    I printed your post off and ran over to the shop (real quick)

    Took maybe 30mins to do it.

    But, she fired right up, after a few bugs worked out, I took her outside hooked up my leads, and made a couple welds.

    Life is to short for cheap tools.

  6. #26



    Made an ok weld.
    These rods had been cold for months. open box.
    Poor helmet, poor gloves, poor stability....

    But what am I complaining about???!!!!

    The welder is running!! Welding!!!

    Thanks guys for putting up with me one more time.

    I have two more welders coming in the mail, I might need help on them

    Life is to short for cheap tools.

  7. #27

    Default Is this OK???

    What do you think????

    Hows it look???

    My hats off to you guys for putting up with me....

    I really appreciate it.

    Hopefully I can help you guys with something, someday

    Attached Images Attached Images
    Life is to short for cheap tools.

  8. #28
    Join Date
    Nov 2003


    Glad you got it sorted out...

    so many times IT IS the Simple things that get you...

    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

  9. #29


    Quote Originally Posted by H80N View Post
    Glad you got it sorted out...

    so many times IT IS the Simple things that get you...

    Thanks H80N, and a Big Thanks Ed....

    That arc on that buzzard is pretty smooth for 7018, but a little soft for 6010....

    I'm not sure if I'm gonna get a tig torch etc, or just sell it....

    We'll, since me being a 7018 man, fits me....


    Hows the slag look on that bead???
    Anyone still content with raking the slag???
    Life is to short for cheap tools.

  10. #30


    No one likes the slag....

    Back to the drawing board...

    Life is to short for cheap tools.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/ on line 79

Welding Projects

Special Offers: See the latest Miller deals and promotions.