Hi guys, I dont post much but was hoping for some insight?
I have a Passport Plus (now discontinued) w/ the M-100 gun. Ive put several spools of wire through and countless hours. Ive noticed lately the gun wont fire, meaning when I go to start my weld it wont spark or feed?
I checked the ground cable connections and they look good. Are the M-100 guns prone to breaking or should I be concerned with the machine itself?
Looks like they sell a replacement trigger, which is what I suspect this might be?
Any suggestions on what I should be looking for?
Also, if I do need to in fact get a new gun what are my options for my setup. NOTE: I do a lot of tight spaces welding, so a smaller nozzle is nice.
Results 1 to 10 of 11
04-04-2014, 10:06 AM #1Junior Member
- Join Date
- May 2010
Millermatic M-100 gun not firing, replacement or repair?