Hi, I am planning a fire-pit project.
I am looking for a commercially-available 304 stainless "butt-welded" ring, around 24" in diameter. I would like the material to be basically 1-1/2" flat bar, 1/8" thickness, formed into a ring and butt-welded.
Does anyone know any suppliers that might carry something like this?
Results 1 to 2 of 2
Thread: Butt-Welded stainless rings
03-19-2014, 09:12 AM #1Junior Member
- Join Date
- Mar 2014
Butt-Welded stainless rings
03-19-2014, 11:00 AM #2
Any weld shop with a roller can do it. Post your location & I'm sure someone will give you a place. I'm in northern NJ & could do it.
Edit -- I was assuming you needed it rolled the easy way? Or do you need it rolled the hard way? If the hard way you could also have it plasma cut out of sheet. I could do that also.
Last edited by MMW; 03-19-2014 at 11:02 AM.MM250
Lincoln ac/dc 225
MM200 black face
Whitney 30 ton hydraulic punch
Lown 1/8x 36" power roller
Arco roto-phase model M
Vectrax 7x12 band saw
Miller spectrum 875
30a spoolgun w/wc-24