i tried to get onto face book late last night, i couldnt log on, going to try again
Results 21 to 23 of 23
Thread: Welding on Facebook
03-06-2014, 05:10 PM #21Senior Member
- Join Date
- Jun 2009
- greenfield new hampshire
03-07-2014, 08:54 AM #22Member
- Join Date
- Jan 2014
Checked out your page and I must say that is some seriously nice work you're doing.
I wanted to ask you about your Dynasty 700. Is there any thing it's doing for you that a Dynasty 350 wouldn't do equally as well?
I've done quite a bit of aluminum welding with a Syncrowave 300 and while there were a couple of times I was wishing I had the Syncrowave 500 I just can't imagine a situation where you would ever need any more than that for manual TIG welding.
About a year a go I got to play with a Dynasty 200 for about an hour on some aluminum and was pretty amazed with what it will do. There's no doubt it will out preform a Syncrowave on aluminum. And I really want one.
While I think the 200 is a little on the small side for serious aluminum work I just can't help but think that the 700 would be serious, unnecessary over kill.
Since you obviously have more experience with the Dynasty series machines I'd like to hear your thoughts on the subject.
Thanks.Will Argue for Beer (any issue, either side)
03-07-2014, 11:02 AM #23
It is probably overkill.....
Duty cycle isn't an issue
I also have 800 amp 3 phase service and people act like that is overkill.
My shop is now seven times bigger than my old one.
I'm probably not the guy to ask anymore, cause I'm not thinking about I need less space or amps.
I can weld 300+ amps as long as I want nonstop on real thick material.
My only concern is burning up torches and extension cords.
Seriously if you was to go back a few years into my history you would see I got this machine on a KILLER DEAL. You would have bought it. Anybody would have,had they only known about it!
I am blessed. I am going to use my blessings to the best of my abilities while I still can.
What some people look at and see as overkill I see as endless possibilities
Now if you wanna talk about big payments, I can get right there with ya!
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400